Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
This supplement to the Owner’s Manual describes these changes. Additional menus in Sampling Edit/Sampling Main display With this new version, “[F3] Normalize,” “[F4] Slice,” and “[F5] Remix” have been added to the Sampling Edit display and Sampling Main display respectively, allowing you to more easily call up these displays. Sampling Edit display Sampling Main display NOTE For details about “Normalize,” “Slice,” and “Remix”, refer to the MOTIF XS Owner’s Manual. Increasing the available memory of the DIMM Deleting the Waveforms with the same name, a new Sampling Job now lets you increase the available memory of the DIMM. 1 From the [F3] Other display of the Sampling Job, select “03: Delete Same Name Waveforms” then press [ENTER]. 2Select the Waveform number at 1. All the Waveforms having the same name are listed on the “Same Name Waveforms (2)” section of the display. 1 2 NOTICE This Job will delete all Waveforms with the same name except for the selected Waveform, even if they contain different data. 3 Press [ENTER] to execute the Job. This operation will delete all the Waveforms with the same name except for the selected Waveform. NOTE This operation will cancel the link status between the Voices and deleted Waveforms, then make a new link between the same Voices and the undeleted Waveforms respectively. EN New Functions in MOTIF XS Version 1.60 1 Editing and storing a Sample Voice as a Mixing Voice Editing and storing a Sample Voice as a Mixing Voice 1 From the Mixing Play display, select a Part to which a Sample Voice is assigned. “VceConv” appears at the tab corresponding to [F6]. 2 Press [F6] VceConv to convert a Sample Voice of the selected Part to a Mixing Voice. Completion of conversion calls up the Mixing Voice Store window. 3 Use the data dial or [INC/YES]/[DEC/NO] to select a Store destination number in the Mixing Voice Store window. NOTE Only the MIXV (Mixing Voice Bank) is available. 4 Press [ENTER] to call up the Confirmation dialog. To cancel the Store operation, press [DEC/NO] to return to the original display. 5 Press [INC/YES] to execute the Store operation. After the Store has been completed, a “Completed” message appears and operation returns to the Mixing Play display. You can confirm that the stored Mixing Voice is assigned to the Part selected in step 1. NOTICE After the above operations, make sure to execute the Song/ Pattern Store. Otherwise, the Mixing Voice assignment will be lost when turning the power off or selecting the different Song/ Pattern. Editing a Drum Voice in the Mixing mode You can now edit a Drum Voice in the Mixing mode. The edited Drum Voice can be stored to the User Drum Bank. 1 Press the [MIXING] button in the Song mode or Pattern mode to call up the Mixing Play display in the Mixing mode. Voice Category Voice name Voice Number [F6] button Voice Bank 2 Move the cursor to the Part to which the desired Drum Voice is assigned. The name of the selected Voice is shown at right top of the display. You can...
Dieses Handbuch ist für folgende Modelle:Tasteninstrumente - MOTIF XS7 (1.46 mb)
Tasteninstrumente - MOTIF XS8 (1.46 mb)