Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Press the [F5] CLICK button to turn Click on 12 and play the metronome during the recording. When the “sound” icon below is displayed, Click is on and the metronome will play during the recording. 13 Press the [F] (Play) button to start recording. Play a note or notes on the keyboard to trigger Arpeggio playback. The root chord of the bass pattern changes depending on the key you play. Start recording Arpeggio playback SEQ TRANSPORT LOCATE 1 2 REC Actual recording starts after one measure. Recording stops automatically when Pattern playback reaches the end, since Loop is set to “off.” Turn the [ARPEGGIO ON/OFF] indicator off, and press the [F] (Play) button to hear your newly recorded bass guitar pattern. 14 Next, let’s record the guitar pattern. Select the track to which the guitar will be 15 assigned. Press the [TRACK SELECT] button so that its lamp lights, and select a Part by pressing the Number [3] button. Record the guitar part using the Arpeggio, in the same way you did with the bass guitar part above. 16 Follow steps 8 –14 above, this time selecting the “GtPl” (Guitar & Plucked) in the Arpeggio category, and try out the various guitar phrases. 80 Owner’s Manual MIDI data recorded in the Pattern mode is stored as a User Phrase. You can store up to 256 User Phrases to a single Pattern. Next, let’s use the Pattern Copy function and record our User Phrases to Section B. Copying Patterns and Creating a Pattern with User Phrases In the following steps, you’ll assign the same phrases as the drum and bass guitar parts of Section A to the drum and bass parts of Section B, and create a guitar part playing the guitar and bass in unison. Copying a Pattern In order to assign the drum and bass phrases of section A to section B, we’ll copy the performance of Section A to section B. Press the [PATTERN] button to enter the Pattern Play mode, then press the [JOB] button to enter the Pattern Job Mode. Copy the Pattern in the [F6] PATTERN display. Select “01: Copy Pattern” and press the [ENTER] button. Select the Pattern Numbers and Sections for both the source and destination. Select the Pattern number you created earlier and Section A for the source. Select the same Pattern number and Section B for the destination. Source Destination Press the [ENTER] button, then press the [INC/ 4 YES] button to execute the Copy operation. Press the [EXIT] button several times to go 5 back to the Pattern Play mode. Turn the [SECTION] button on, then press the 6 [B] button. Section B is selected. Press the [F] (Play) button to play back and confirm the copied Pattern. Creating a Pattern with User Phrases Have the guitar and bass play together by using the user phrase of the bass recorded in Section A. Press the [F3] TRACK button, then press the [SF3] TR VCE button to call up the Phrase Voice display. 7 Set the Phrase Voice parameter in Track 3 (Guitar) to off. You can use only MIDI sequence data in the User Phrase. n If you leave the Phrase Voice setting at “on,” the Voice will change when using the user phrase for the guitar part in step 8. Press the [F4] PATCH button to call up the 8 Patch display. Set the Pattern so that the user phrase of the 9 bass of Track (Part) 2 will be used for Part 3. Select the phrase number of Part 3 and set it to the same phrase number of the bass phrase of Part 2. Press the [F] (PLAY) button to play back 10 Section B. Adjust the octave and velocity of the guitar phrase as desired from the [F2] NOTE screen of the Pattern Job mode. CAUTION The same User Phrases can be assigned to different Sections within a pattern. Keep in mind, however, that the Section data will automatically be changed if another Section sharing the same User Phrase is changed. Creating Quick Guide Owner’s Manual 81 Quick Guide Creating a Song on the MO Creating a Pattern Next, record Section C by using realtime recording or step recording. Creating a Pattern with the Realtime and Step Recording methods For Section C, set the drums, bass and guitar to the same as section A, and then add a piano part using Realtime recording, and enter a strings part by using Step recording. Here we’ll also adjust the rhythmic feel of the phrase by using the Groove function. Copying a User Phrase from another Pattern to the current Pattern The User Phrases that can be assigned with the Patch function are limited to the ones contained in the currently selected Pattern. To copy Phrases from other Patterns for use in the current one, follow the instructions below. 1 In the [F4] PATCH display, press the [SF5] COPY button to call up the Copy Phrase display. 2 First, specify the source Pattern number and Phrase number as well as the destination (current Pattern) Phrase number and track number. Then, press the [ENTER] button to execute the Copy operation. 3 Press the [EXIT] button to return to the [F4] PATCH display, then check the assigned Phrase by pressing the [F] (Play) button to play the Pattern. TIP Source Destination Quick Guide Creating a Song on the...
Dieses Handbuch ist für folgende Modelle:Tasteninstrumente - MO8 (4.47 mb)