Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Click [THRU] to bypass the Insertion Effects. & REVERB & CHORUS controls Use the “REVERB” and “CHORUS” knobs to set the level of the signal from Insertion Effect 1/2 (or the by-passed signal) sent to the Reverb/Chorus unit. 24 Insertion Effect Units 1432 Insertion Effect Units 1432 1 CONNECT selector Click on the text box and choose the order in which signals are passed from one insertion effect unit to the other. 2 Indicator lamps These show which of the Elements are assigned to the respective Insertion Effect unit. nThe Indicator lamps are not available for Drum Voices. 3 [DETAIL] button Click this to set the exact parameters for the respective Insertion Effect via the “DETAIL” dialog. 4 Effect Type selector Click on the text box and choose the type of Insertion Effect. 25 System Effects 123645 System Effects 123645 1EFFECT SEND controls The signals from Insertion Effects 1 and 2 are sent to the System Effect section. Use these knobs to set the level of the signal of Insertion Effect 1/2 (or the by-passed signal) sent to the Reverb/Chorus effect. 2[DETAIL] button Click this to set the exact parameters for the respective System Effect via the “DETAIL” dialog. 3Effect Type selector Click on the text box and choose the type of Reverb or Chorus Effect. 4EFFECT PAN controls Use these knobs to set the stereo positioning of the respective System Effect. 5EFFECT RTN controls The signals from both System Effects are combined at the output. Use these knobs to set the amount of each System Effect that is used in the output signal. 6CHORUS . REVERB control Use this knob to set the level of the signal of sent from the Chorus unit to the Reverb unit. 26 OMS Settings (Macintosh) The Voice Editor software uses OMS (Open Music System) for MIDI input/output. To use the Voice Editor software, OMS must be installed beforehand. nFor information about installing OMS, refer to the separate Installation Guide. About OMS Voice Editor uses the OMS (Open Music System) to transfer MIDI data to an external MIDI device. OMS is a system extension that goes in the Mac OS System folder, designed to manage the MIDI data stream (input & output) in a computer, to enable MIDI data transfer between MIDI software and hardware attached to the computer. OMS is a de facto standard of the MIDI environment under the Mac OS, and various music software manufacturers have released OMS-compatible sequencer and other software. OMS has the following merits: • As OMS-compatible MIDI applications communicate with various MIDI devices via OMS, it is no longer necessary for you to set up multiple MIDI drivers for those applications. Thus, you can avoid conflicts between different drivers with the same purpose (MIDI control). • Once a Studio Setup is read in OMS, any OMS-compatible application will be aware of it, even if you need to reconfigure the routing of the MIDI data stream or change the current Studio Setup. OMS-compatible applications will commonly recognize the new configuration. • You can have different Studio Setups to choose one from,to switch to a different MIDI routing (patches between MIDI devices and software) fast and easily. • Every time the OMS Setup application is opened, any MIDI device connected to the computer is automatically detected, and its icon appears with a current MIDI status (channel number, port number, patches, etc.). Once devices are configured with OMS Setup, however, you need not care too much about the status. • OMS can drive various MIDI interfaces, including the standard type (16 channels) and the multi-port type (16 channels per port). If you use a multi-port type, you can control over 16 channels simultaneously via OMS. nFor more information about OMS features, see the READ ME file included with OMS. Setting up OMS Setup files for the CS6x, CS6R , S80 and S30 have already been created for use with Voice Editor; please use the appropriate file for your device. The following example is for the CS6x. 1. First, interconnect the “TO HOST” terminal of the CS6x and the Macintosh serial port, then set the “Host Select” switch of the CS6x to “Mac.” 2. Double-click the “OMS Setup” icon in the “OMS Application” folder. 3. Choose “Open” from the “File” menu and select “CS6x-Modem” from within the “OMS setup for YAMAHA” folder. nIf you are using a computer with no modem port (such as the Performa series), look in the “CS6xPrinter” folder instead. 4. Choose “Make Current” from the “File” menu. The setup for your CS6x is now saved as the current studio setup. 5. Choose “Quit” from the “File” menu to close OMS Setup. nVoice Editor is not compatible with versions of OMS earlier than 2.0. 27 OMS Port Setup OMS Port Setup 1. First, start up Voice Editor by double-clicking its icon. n If AppleTalk is enabled, you will get an alert message. Click “OFF.” It will take some time for AppleTalk to be disabled. 2. Choose “OMS Port Setup” from Voice Editor’s “MIDI” menu, then select the port settings. In the following example, the tone generato...
Dieses Handbuch ist für folgende Modelle:Tasteninstrumente - S30 (956.2 kb)
Tasteninstrumente - S80 (956.2 kb)