Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
2 Updating the Disklavier ............................................................................................. 4 English Copyright © 2011 by Yamaha Corporation YD274C0 Updating the Disklavier Downloading the Update Program You can download the update program in one of two ways. ¦ Downloading the Update Program Directly from the Internet 1 Press [INTERNET] on the remote control. The Internet menu screen appears. .... .. 2 Select “Update” with the cursor buttons ([ ] [ ] [ ] [ ]), then press [ENTER]. *D-Radio *Update *MyAccount =Internet= (1/1) The update screen appears if there is any update available for your instrument. If you currently have the latest version, you will not see this screen. .. .... You can scroll up or down using the cursor buttons ([ ] [ ]). Continued on next page English 3 Updating the Disklavier Following the instructions on the screen, select the option with the cursor buttons ([ ] [ ] [ ] [ ]), then press [ENTER]. *Update Fir =Update= . *Cancel ... The download process of the update program starts. .. 4 After the download process is completed, shut down the Disklavier by pressing [ON/OFF] on the control unit. .... .. The update program is now downloaded and ready to be installed. Update the firmware following the procedures in “Updating the Disklavier” on page 4. ¦ Downloading the Update Program Using a PC and USB Flash Memory 123 Note: Prepare the personal computer and USB flash memory. The USB flash memory that you use must have a MINIMUM of 20.0 MB of space to copy the update program. Download the update program from Yamaha website. Note: Copy the update program you have downloaded to the Copy the update program to the root USB flash memory. directory of the USB flash memory. If you have an earlier version of the update program on the USB flash memory you will be using for this update, make sure to delete it before updating your Disklavier. Having more than one update program on the USB flash memory may cause your Disklavier to malfunction. Continued on next page English 4 Updating the Disklavier Insert the USB flash memory including the update program into the USB port of the control unit. USB flash memory USB port The update program is ready to be installed. Update the firmware following the procedures in “Updating the Disklavier” on page 4. Updating the Disklavier Update the Disklavier firmware using the update program you downloaded. 1 While holding [PLAY/PAUSE] on the control unit, press [ON/OFF]. + CTRL system v2.20 (ENT)*UPDATE Hold The current version information of each module appears one after the other. 2 Make sure that the update program is prepared, then press [ENTER] on the control unit. The starting screen appears. .... .... 3 Press [ENTER] on the control unit again. After a while, the update confirmation message of each module appears. v2.20 (PLAY,STOP)MC -SURE? v3.00. Note: Depending on the version or specification of the Disklavier, the actual indications for the version a...
Dieses Handbuch ist für folgende Modelle:Tasteninstrumente - DS6E3PRO PE (133.7 kb)
Tasteninstrumente - DA1E3 PE (133.7 kb)
Tasteninstrumente - DC1A PE (133.7 kb)
Tasteninstrumente - DC1E3 (133.7 kb)