Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
BREAK Stop the Rhythm for one measure (break). Turning Chord Intelligence On/Off (Chord Intelli) “Chord Intelligence” is a feature that intelligently plays the correct accompaniment chords the moment you play a key specifying a chord on the Lower keyboard during Automatic Accompaniment. To play a C chord on the Lower keyboard, for example, you usually have to press down the three keys C, E, and G; but with Chord Intelligence, you only have to press the C Key to initiate a C chord accompaniment. 1. Press the [Utility] button. 2. Press the Menu [ ] and [ ] buttons to select “Chord Intelli” (Chord Intelligence). 3. Press the Value [-] and [+] buttons to switch the Chord Intelligence “ON” or “OFF.” Setting Descriptions ON Chord Intelligence function is ON. OFF Chord Intelligence function is OFF. To return to the basic screen, press the [Utility] button. . For more information about chord fingering, see the “Chord List” (p. 106). ¦ About the Chord Intelligence Function When the [One Touch Program] button is pressed, the Chord Intelligence function is automatically switched ON (p. 35). . Switching Chord Intelligence Off... • Switch OFF the “Chord Intelligence” setting in the Utility menu. * If the Utility menu “Regist Shift” setting is “RIGHT” or “LEFT”, the Foot Switch will be dedicated to switching through the Registrations, and the “Right Foot Sw” or “Left Foot SW” setting will be ignored. Various Other Settings Using the Leading Bass Function (Leading Bass) When Automatic Accompaniment is used, and the Pedal [To Lower] button is ON, the Pedal Bass voice will normally play the root note (p. 109) of the chord you play on the Lower keyboard. If the Leading Bass function is enabled, the lowest note of the chord you play on the Lower keyboard will then be used as the bass note (the bottom note of the chord). For this reason, the bass note will be sounded differently than normal when you play an inverted chord (p. 109). 1. Press the [Utility] button. 2. Press the Menu [ ] and [ ] buttons to select “Leading Bass.” 3. Press the Value [-] and [+] buttons to switch the Leading Bass “ON” or “OFF.” Setting Descriptions ON The Leading Bass function is on. The pedal bass tone will sound the lowest note of the chord you play in the lower keyboard. OFF The Leading Bass function is off. To return to the basic screen, press the [Utility] button. . You can assign the Leading Bass functions to either of the foot switches located on each side of the Expression Pedal (p. 88). * While the intro or ending are playing, playing the lower keyboard will not produce sound. Changing How the Solo Voice Responds (Solo Mode) When the Solo voice is assigned to the Upper keyboard, you can specify how the Solo voice will respond when more than one key is pressed. 1. Press the [Utility] button. 2. Press the Menu [ ] and [ ] buttons to select “Solo Mode.” 3. Press the Value [-] and [+] buttons to change the setting for Solo Mode. Setting Descriptions TOP NOTE The Solo voice will sound the highest note that is played for the Solo part. LAST NOTE The Solo voice will sound the note that was most recently played for the Solo part. POLYPHONIC The Solo voice will sound all notes that are played for the Solo part. To return to the basic screen, press the [Utility] button. Various Other Settings Layering the Solo Voice and Lower Voice (Solo To Lower Mode) When the Solo voice is being played by the Lower keyboard (i.e., when the Solo [To Lower] button is ON), you can specify whether the Lower voice and the Solo voice will sound together (layered), or will sound separately (split). 1. Press the [Utility] button. 2. Press the Menu [ ] and [ ] buttons to select “SoloToLwr Mode” (Solo To Lower Mode). 3. Press the Value [-] and [+] buttons to switch the “SPLIT” or “LAYER.” Setting Descriptions SPLIT The parts will sound separately. LAYER The Lower voice and Solo voice will sound together. To return to the basic screen, press the [Utility] button. Changing the Solo Split Point (Solo Split Point) This setting is used to determine the Solo Split Point (lower limit of the playable range of the Solo voice) on the Lower keyboard to any desired position. 1. Press the [Utility] button. 2. Press the Menu [ ] and [ ] buttons to select “SoloSplitPoint.” 3. Press the Value [-] and [+] buttons to change the Solo Split Point. Settings C2 – C7 . By pressing the Value [+] and [-] buttons simultaneously, you can restore the default setting (B 4). To return to the basic screen, press the [Utility] button. Changing the Pedalboard Polyphony (Pedal Bass Mode) You can set the Bass Pedalboard to play simultaneous multiple notes or single notes only. 1. Press the [Utility] button. 2. Press the Menu [ ] and [ ] buttons to select “PedalBass Mode.” 3. Press the Value [-] and [+] buttons to switch the Pedal Bass Mode “MONOPHONIC” or “POLYPHONIC.” Setting Descriptions MONOPHONIC Only single notes can be played. POLYPHONIC Multiple notes can be played. To return to the basic screen, press ...
Dieses Handbuch ist für folgende Modelle:Musikinstrumente - AT-15 (3.75 mb)