Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Fotos und technische Daten Roland AT-15 |
Anleitung Zusammenfassung
When the data has been saved, the basic display reappears. When the Registration set is saved to the floppy disk, the indication of “- - -” will change to “USE.” Using the Registration Buttons Loading Previously Saved Registration Sets Into the AT-15 Here’s how to recall a previously saved Registration set from the floppy disk into the memory of the AT-15. Registrations can be selected in the following two ways. • Loading a Set of Registrations You can load a “set” (a collection of settings for Registration buttons [1]–[8]) from floppy disk. • Loading an Individual Registration You can load settings for an individual Registration button [1]–[8]. ¦ Loading a Set of Registrations Registrations Sets saved to a floppy disk can be loaded back into the instrument. 1. Insert the floppy disk containing the Registration into the disk drive. 2. Press the [Registration] button (indicator lights). 3. Press the Select [-] and [+] buttons to select the Registration set that you wish to load. To cancel the procedure, press the [Registration] button. 4. Press the [Load] button to execute loading. When loading is complete, the basic screen reappears. NOTE Be aware that when you load Registrations from a disk, the Registrations that were previously in internal memory will be lost. It is a good idea to save important Registrations to floppy disk (see p. 56). Using the Registration Buttons ¦ Loading an Individual Registration You can load any desired individual Registration to any desired Registration button. 1. Insert the floppy disk containing the Registration into the disk drive. 2. Press the [Registration] button (indicator lights). 3. Press the Select [-] and [+] buttons to select the Registration set that you wish to load. 4. Press the [Utility] button. 5. Press the Value [-] and [+] buttons to specify the Registration button number to be loaded. To cancel the operation, press the [Utility] button. 6. Press the [Rec] button. 7. Press the Value [-] and [+] buttons to specify the storage- destination Registration. 8. Press the [Rec] button. The following display appears. To cancel the procedure, press the [Reset] button. 9. Press the [Rec] button once again. Using the Registration Buttons Deleting a Set of Registrations from a Floppy Disk Here’s how to delete a Registration set that was saved to a floppy disk. 1. Insert the floppy disk containing the Registration into the disk drive. 2. Press the [Registration] button (indicator lights). 3. Press the Select [-] and [+] buttons to select the Registration set that you wish to delete. 4. Simultaneously press the [Save] button and the [Registration] button. The following display appears. To cancel the operation, press the [Reset] button. 5. If you are sure that you wish to delete the data, press the [Rec] button. When a Registration set has been deleted, the indication of “USE” will change back to “- - -.” If you had assigned a name to the Registration set you deleted, the nam...
Dieses Handbuch ist für folgende Modelle:Tasteninstrumente - AT15 (3.75 mb)