Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
® • Safety • Accessories • Operation • Maintenance • Parts • Espadol Save this manual for future reference. Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA Visit our Craftsman website: PERSONALSAFETY _ib _j/_ WARNING: Read and understand all instructions. Stay alert, watch what you are doing and Failure to follow all instructions listed use common sense when operating a below may result in electric shock, fire power tool. Do not use tool while tired or and/or serious personal injury. under the influence of drugs, alcohol, or SAVE THESE INSTRUCTIONS. medication. A moment of inattention while operating power tools may result in WORK AREA serious personal injury. • Keep your work area clean and well lit. • Dress properly. Do not wear loose Cluttered benches and dark areas invite clothing or jewelry. Contain long hair. accidents. Keep your hair, clothing, and gloves • Do not operate power tools in explosive away from moving parts. Loose clothes, atmospheres, such as in the presence of jewelry, or long hair can be caught in flammable liquids, gases, or dust. Power moving parts. tools create sparks which may ignite the • Avoid accidental starting. Be sure switch dust or fumes. is off before plugging in. Carrying tools • Keep bystanders, children, and visitors with your finger on the switch or away while operating a power tool. plugging in tools with the switch on Distractions can cause you to lose invites accidents. control. • Do not overreach. Keep proper footing and balance at all times. Proper footing ELECTRICAL SAFETY and balance enables better control of • Double insulated tools are equipped with the tool in unexpected situations. a polarized plug (one blade is wider than Usa safety equipment. Always wear eye the other.) This plug will fit in a polarized protection. Dust mask, non-skid safety extension cord only one way. If the plug shoes, hard hat, or hearing protection does not fit fully in the outlet, reverse the must be used for appropriate conditions. plug. If it still does not fit, contact a qualified electrician to install a polarized TOOLUSEAND CARE outlet. Do not change the plug In any • Use clamps or other practical ways to way. Double insulation [] eliminates the secure and support the workpiece to a need for the three-wire grounded power stable platform. Holding the work by cord and grounded power supply system. hand or against your body is unstable • Avoid body contact with grounded and may lead to loss of control. surfaces such as pipes, radiators, • Do not force tool. Use the correct tool for ranges and refrigerators. There is an your application. The correct tool will do increased risk of electric shock if your the job better and safer at the rate for body is grounded. which it is designed. • Don't expose power tools to rain or wet • Do not use tool if switch does not turn it conditions. Water entering a power tool on or off. A tool that cannot be controlled will increase the risk of electric shock. with the switch is dangerous and must • Do not abuse the cord. Never use the be repaired. cord to carry the tools or pull the plug • Disconnect the plug from the power from an outlet. Keep cord away from source before making any adjustments, heat, oil, sharp edges or moving parts. changing accessories, or storing the Replace damaged cords immediately. tool. Such preventive safety measures Damaged cords increase the risk of reduce the risk of starting the tool electric shock. accidentally. • When operating a power tool outside, use an outdoor extension cord marked "W-A" or "W." These cords are rated for outdoor use and reduce the risk of electdc shock. 2 TOOL USE AND CARE Use only accessories that are • Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. • Maintain tools with care. Properly maintained tools are less likely to bind and are easier to control. • Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. recommended by the manufacturer for your model. Accessories that may be suitable for one tool may create a risk of injury when used on another tool, SERVICE • Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. • When servicing a tool, use only identical replacement parts. Follow instructions in the maintenance section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury. CARTON CONTENTS • Storage Case • Buffer/Polisher • Terrycloth Bonnets (3) • Wax Applicator Bonnets (5) AVAILABLE ACCESSORIES Item Polishing bonnet (1) Terrycloth bonnets (2) Wax applicator bonnets (4) Cleaner/Glaze (8 oz.) Clear Pro TM Wax (8 oz.) Wax (8 oz.) Sto...