Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Festool Dateigröße: 367.16 kb Dateiname: Unterrichtssprache:

Fotos und technische Daten  Festool  ETS 150/5 EQ

To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. Technical data ETS 150/3 EQ ETS 150/5 EQ Wattage W 310 310 No load speed rpm 6 000 - 10 500 6 000 - 10 500 No. of strokes spm 12 000 - 21 000 12 000 - 21 000 Sanding stroke mm (in.) 3.0 (0.12) 5.0 (0.20) Sanding base, O mm (in.) 150 (5.9) 150 (5.9) Weight kg (lbs) 1.8 (4.0) 1.8 (4.0) Safety level UL 745, CSA C22.2 No. 745 Symbols The user bears sole responsibility for any damage or accidents resulting from V Volts incorrect use. A Amperes Hz Hertz Electrical connection and operationW Watt The mains voltage must correspond with the Alternating current voltage on the rating plate! n0 No load speed See the following figure for connection and dis- Class II Construction connection of the power cable. rpm Revolutions per minute spm Strokes per minute Always switch the machine off O Diameter before connecting or disconnecting the power cable! dry sanding. Intended use The sanders are designed for sanding wood, plastic, composite materials, paint / varnish, filling material and similar materials. Metal and materials with an asbestos content must not be processed with these tools. The machines must not be damp nor operated in a damp environment for electrical safety reasons. The machines may only be used for 3 Switch (2.1) is an on/off switch. For continuous use it can be engaged with the lateral locking button (2.2). Pressing the switch again releases the lock. Electronic control ELECTRONIC The ETS 150/3 EQ, ETS 150/5 EQ has an electronic control with which the rotational speed can be varied step-free. This allows the sanding speed to be adapted to the optimum level according to the material concerned. The speed is set using the rotary control button (2.3). The numbers on the rotary control button represent approximately the following strokes per minute: Dust extraction Dust extractors prevent large accumulations of dust in the air in the working environment and dirt collecting in the workplace. Inboard extraction The machines are fitted with inbuilt extraction as standard. The sanding dust is extracted through suction openings in the sanding base (3.4) and trapped in the turbo-filter (3.2). The turbo-filter has to be changed when it is so full of dust that the extraction power diminishes. Inserting a turbo-filter -Push the front cardboard section of the turbo- filter with the sealing lip (3.1) onto the extraction nozzle (3.8) of the filter holder -Insert rear cardboard section with slot (3.3) onto the retaining strip (3.9) of the filter holder -Push the filter holder with its opening (3.6) as far as it will go onto the extraction nozzle (3.5) of the machine and clamp tight by turning rotary knob (3.7). External extraction by an extraction unit In order to avoid frequent changing of the turbo- filter when carrying longer sanding jobs, it is possible to connect a Festool extractor to the unit instead of using inbuilt extraction. In this case, the extraction pipe (O 27 mm (4.1)) of the extraction unit is connected to the suction nozzle. Attaching sanding material The appropriate Stickfix sanding paper and Stickfix sanding felt can be fastened quickly and easily onto the Stickfix sanding base. The self-adhesive sanding material (5.2) is simply pressed onto the sanding base (5.1) and held safely in place by the Stickfix sanding base velcro surface. 4 Choice and installation of the grinding disks The appliance can be fitted with three grinding disks (5.1) of different hardness depending on the surface to be treated. -Hard: coarse grinding on surfaces, grinding at edges. -Soft: universal for coarse and fine grinding, for flat and curved surfaces. -Super-soft: fine grinding on formed parts, curves, radii. Do not use on edges! The grinding disks and the tool-holding fixture on the appliance are equipped with a positive holder (6.1). Make sure the grinding disk is correctly positioned before screwing it tight. Working with the machine Never overload the tool by using too much pressure! The best sanding results are achieved when applying moderate pressure. The ETS 150/3 EQ gives the best surface quality and low abrasion. The ETS 150/5 EQ provides high abrasion with good surface quality. The sanding performance and quality depend mainly on the choice of the right sanding material. Festool offers the appropriate sanding material for all applications (see Festool catalogue or on the Internet under "We recommend the following settings on the rotary control (2.3) for electronic machines: 5 - 6 -sanding with max. drive -sanding old paint -sanding wood and veneer prior to painting -interim sanding of paint on surfaces 4 - 5 -sanding of thinly applied primer -sanding of wood with sanding vlies -sanding edges on wooden parts -smoothing primed wooden surfaces. 3 - 4 -sanding full wooden and veneer edges -sanding in the...

Herunterladen

Geben Sie zwei Ziffern: