Stimmen - 4, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Milwaukee Dateigröße: 283.09 kb Dateiname: 58-12-2331.pdf Unterrichtssprache:

6012 120 Volts 12,000 Orbits/Min. Uses 3-2/3” x 9” Sandpaper CATALOG NO. 6014 120 Volts 12,000 Orbits/Min. Uses 4-1/2” x 11" Sandpaper OPTIONAL DUST PICK-UP KIT CATALOG NO. 48-09-0300 For Use with No. 6014 Orbital Sander IMPORTANT-Before placing tool in operation, record the following information from nameplate. Model Number_ Serial Number_ Date of Purchase_ MILWAUKEE ELECTRIC TOOL CORPORATION 13135 West Lisbon Road • Brookfield, Wisconsin 53005 THIS SYMBOL ... ' IfJJ/'itainsJar ... IS YOUR ASSURANCE 1. That every tool manufactured by MILWAUKEE is produced in accordance with applicable Standards for Safety of Underwriters' Laboratories and American National Standards (ANSI). 2. That compliance with applicable safety standards is assured by independent inspection and testing conducted by Underwriters' Laboratories (UL). 3. That every motorized tool manufactured by MILWAUKEE is fully inspected. 4. That every tool has with it adequate instructions and a list of safety rules for the protection of the user. WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury including the following items. Read all instructions and save them for future reference. SAFETY INSTRUCTIONS FOR ALL POWER TOOLS 1. KNOW YOUR POWER TOOL. Read owner's manual carefully. Learn its applications and limitations as well as the specific potential hazards peculiar to this tool. 2. GROUND ALL TOOLS-UNLESS DOUBLE-INSULATED. If the tool is equip ped with a three prong plug, it should be plugged into a three hole electrical receptacle. If an adapter is used to accomodate a two hole receptacle, the grounding ear must be attached to a known ground. Never remove the third prong. 3. KEEP GUARDS IN PLACE and in working order. 4. KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents. 5. AVOID DANGEROUS ENVIRONMENTS. Don't expose power tools to rain or use in damp or wet locations. Do not use tool in presence of flammable liquids or gases. Keep the work area well lit. 6. KEEP CHILDREN AWAY. All visitors should be kept a safe distance from the work area. Do not let visitors contact tool or extension cords. 7. STORE IDLE TOOLS. When not in use, tools should be stored in a dry, high or locked-up place —out of reach of children. 8. DON'T FORCE TOOL. It will do the job better and safer at the rate for which it was designed. 9. USE RIGHT TOOL. Don't force a small tool or attachment to do the job of a heavy-duty tool. Don't use a tool for a purpose it was not designed for, such as using a circular saw for cutting tree limbs or logs. 10. WEAR PROPER APPAREL. No loose clothing or jewelry to get caught in moving parts. Rubber gloves and insulated non-skid footwear are recommended when working outdoors. Wear protective covering to contain long hair. 11. USE SAFETY GLASSES at all times. Also, use a face or dust mask if cutting operation is dusty. 12. DON'T ABUSE CORD. Never carry the tool by its cord or yank it to disconnect from the receptacle. Keep cord from heat, oil and sharp edges. 13. SECURE WORK. Use clamps or a vise to hold work. It's safer than using your hand and it frees both hands to operate tool. 14. DON'T OVERREACH. Keep proper footing and balance at all times. 15. DISCONNECT TOOLS. When not in use; ...

Herunterladen

Geben Sie zwei Ziffern: