Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Abocom
Dateigröße: 371.89 kb
Dateiname: 5fb136c8-b0d0-eff4-452b-a8b0f3673f18.pdf
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
The simplest way to achieve this is; before you begin and every minute or so during the hardware installation touch a non-painted surface of the computer’s chassis. 1. Before installing the device, make sure the computer is turned off. 2. Remove the expansion slot cover from the computer. 3. Carefully slide the PCI modem card into an available PCI slot, push it evenly and firmly home and ensure it is screwed securely in place using the mounting screw (PCI slots are 85mm long and positioned 40mm from the PC’s rear panel. Generally there are several PCI slots side by side). 4. Plug one end of the telephone cable into the Modem line jack and the other end to the telephone jack in the wall. 5. Replace the cover. 6. After hardware installation is done, move on to the software installation. SOFTWARE INSTALLATION Windows 98 Installation 1. Restart the computer system after the modem is correctly plugged into the PCI slot of your computer. Windows will automatically detect the device. Click Next. 2. When the following dialog box appears, insert the device driver compact disc into your CD-ROM drive and click Next. 3. Select Specify a location and press Browse to choose the folder driver/win98 in your CD-ROM drive. Then click Next. 4. Click Next to continue. 5. When the following figure appears, click Finish. The Installation program will continue. 6. Follow the on-screen instructions to proceed. 7. The program will proceed automatically. Click Finish to complete software installation. Windows 2000 Installation Restart the computer system after the modem is properly plugged into the PCI slot of your computer. Windows 2000 will automatically detect the device. If you want to use the Microsoft built-in driver, execute d:\Driver\Win2000\PAR.exe (assume that d: is your CD-ROM drive). Or you may update the device driver with the utility provided by the manufacturer. 1. Go to Control Panel, double-click System. Select Hardware. Click Device Manager. 2. Right-click LT Win Modem. Select Properties. 3. Select Driver. Click the Update Driver…button. 4. Follow the on-screen instructions to proceed. (Click Next to continue.) 5. Load the Compact Disc that contains the device driver into your CD-ROM drive. Click Browse and select the proper file location with the disc drive followed by Driver\Win2000. 6. Check Install one of the other drivers. Click Next. 7. Select d:\Driver\Win2000\ltmdmnt.inf, click Next. 8. When Windows prompt you to continue the installation. Select Yes. 9. Click Finish to complete the software installation. Windows ME Installation Restart the computer system after the modem is properly plugged into the PCI slot of your computer. Windows ME will automatically detect the device. If you want to use the Microsoft built-in driver, execute d:\Driver\WinME\PAR.exe (assume that d: is your CD-ROM drive). Or you may update the device driver with the utility provided by the manufacturer. 1. Right-click My Computer, then click Properties..Device Manager. 2. Click WDM Modem Enumerator to expand. 3. Load the device driver into your CD-ROM drive. Click Properties..Driver..Update Driver. 4. Select Specify the location of the driver (Advanced) and click Next. 5. Select Display a list of all the drivers…and click Next. 6. Click the Have Disk…button. 7. Click Browse to select the drive where the device driver exists. (for example: D:\) Enter the CD-ROM driver letter followed by driver\Win_ME. 8. Click Next. 9. Click Next to proceed. 10. Click Finish to complete the software installation. Note: Windows ME users who experience low connection speeds to their Internet provider can apply a driver update to improve speeds. To do this, insert the modem driver CD, (you will need to press Exit when the PICShell software installation utility starts). Click on Start, Programs, Windows Explorer. Now explore the CD-ROM by opening the Driver folder, then Win_Me_faster. Double-click on Driver_update.exe, this will lead you through the upgrade process. Windows XP Installation Restart the computer system after the modem is well inserted into the PCI slot of your computer. Windows XP will automatically detect the modem. Perform the following procedures to install the driver. 1. Load the device driver CD into your CD- ROM drive. Close the window that automatically pops up. 2. Go to Start..Run. Click Browse to direct your system to the location where contains the device’s driver (e.g., E:\Driver\Win 2000&XP\Setup). Click OK. 3. Click OK to install the driver. 4. When the following window appears, click Continue Anyway to complete the software installation. 5. Go to Start..Run, enter “regedit”, and click OK. 6. Select HKEY_LOCAL_MACHINE, and click SOFTWARE to expand. If the Lucent and Modem are listed as below, the modem exists and is successfully enabled. If not, consult your distributor for the technical support. Windows NT Installation 1. Reboot the computer system after the modem is correctly plugged into your PCI slot of computer. 2. Load the ...