Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Unplug the power to turn off your modem. Step 4. Connect the power adapter to the router, then plug it into an outlet. Wait until the Wireless LED turns solid green. If none of the LEDs light, make sure that the Power On/Off button is in the on position (pushed in). Step 2. Connect one end of the blue Ethernet cable to your modem, and the other end to the Internet port on your router. Step 5. Connect the router to your computer. Use anouter Ethernet cable to establish a wired connection as shown in this diagram. (Optionally) Connect wirelessly by using the preset wireless security settings located on th bottom label. Step 3. until your modem turns on. Plug in, then turn on your modem. Wait approximately 2 minutes If your modem has a battery backup, first remove and reinsert the battery before connectiong your modem to power. Step 6. Open a browser. If the web page does not display, close and reopen the browser and enter in the address bar, or check the “Troubleshooting” chapter of the user manual. Modem DSL or Cable Internet Power On/Off AC750 Wireless Dual Band Gigabit Router (not included) Preset Wireless Security This product has a unique WiFi network name (SSID) and network key (password). The default SSID and password are uniquely generated for every device (like a serial number) to protect and maximize your wireless security. This information is located on the label on the bottom of the product. NETGEAR recommends that you do not change the preset SSID and password. If you do change the settings, the information on the bottom of the product does not apply. Find the preset wireless settings on your router and record them here: WiFi network name (SSID) _______________________________ Network key (password) _________________________________ If you change the preset wireless settings, record them here: Wireless network name (SSID) _____________________________ Network key (password) __________________________________ If necessary to retrieve or update your password, enter in a web browser and log in using the default user name (admin) and password (password). Select Wireless Settings to locate your wireless password. NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134 USA March 2014 Connect Wireless Devices to Your Router Choose either the manual or Wi-Fi Protected Setup (WPS) method to add wireless computers and other devices to your wireless network. Manual Method 1. Open the software utility that manages your wireless connections on the wireless device that you want to connect to your router (smartphone, laptop, computer, or gaming device). This utility scans for all wireless networks in your area. 2. Look for the preset NETGEAR wireless network name (SSID), and select it. The SSID is located on the product label on the bottom ...