Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
The default SSID for the 802.11b/bg/ng wireless mode is NETGEAR-11g. The SSID of any wireless access adapters has to match the SSID configured in the access point. If they do not match, no wireless connection is made. Note: If you are unable to connect, see Chapter 6, Troubleshooting. Wireless Equipment Placement and Range Guidelines The operating distance or range of your wireless connection can vary significantly based on the physical placement of the access point. The latency, data throughput performance, and notebook power consumption of wireless adapters also vary depending on your configuration choices. Note: Failure to follow these guidelines can result in significant performance degradation or inability to wirelessly connect to the WN604. For complete performance specifications, see Appendix A, Supplemental Information.” For best results, place your access point: • Near the center of the area in which your PCs will operate. • In an elevated location such as a high shelf where the wirelessly connected PCs have line-of-sight access (even if through walls). • Away from sources of interference, such as PCs, microwaves, and 2.4 GHz cordless phones. • Away from large metal surfaces. Putting the antenna in a vertical position provides best side-to-side coverage. Putting the antenna in a horizontal position provides best up-and-down coverage. The time it takes to establish a wireless connection can vary depending on both your security settings and placement. Some types of security connections can take slightly longer to establish and can consume more battery power on a notebook computer. Wireless Settings This section describes how to configure the available wireless settings. 1. Select Configuration > Wireless. The Wireless Settings screen displays: 2. Configure the wireless settings. The settings are described in the following section. 3. Click Apply to save your 802.11b/bg/ng wireless settings. Wireless Settings Screen Fields Wireless Mode. Select the desired wireless operating mode. The default is 11ng. The options are: • 11b. All 802.11b wireless stations can be used. (The 802.11g wireless stations can still be used if they can operate in 802.11b mode.) • 11bg. Both 802.11b and 802.11g wireless stations are supported. • 11ng. All 11b, 11g, and 11ng wireless stations can be used. This is the default. If you select this option, then two additional options, Channel Width and Guard Interval, are display. Note: If you select an option, and some settings on this screen are not available, then you have to select the Turn Radio On radio button to make those settings available. Turn Radio On. On by default, you can also turn off the radio to disable access through this device. This can be helpful for configuration, network tuning, or troubleshooting activities. Wireless Network Name (SSID). This is the name of your wireless network. It is set to the default name of NETGEAR_11ng f...