Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Fotos und technische Daten NETGEAR WN604 |
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
You can also click the documentation links on the Resource CD or the NETGEAR knowledge base at Refer to the Resource CD or click the Documentation link on the user interface to access the Installation Guide for instructions on advanced configuration options. Estimated completion time: 20 minutes. Tip: Before mounting the access point in a high location, first set up and test the unit to verify wireless network connectivity. Package Contents The NETGEAR® Wireless N150 Access Point WN604 contains the following: Set Up the Access Point 1. Connect the access point to your computer: a. Unpack the box and verify the contents. b. Prepare a computer with Internet access and an Ethernet adapter. If this computer is already part of your network, record its TCP/IP configuration settings. Configure the computer with a static IP address of 192.168.0.210 and subnet mask of 255.255.255.0. See the Reference Manual for more detailed instructions. c. Connect the Ethernet cable from the access point to the PC. d. Securely insert the other end of the cable into the access point Ethernet port. e. Connect the power adapter from the access point to an AC power outlet. 1. Power (green/amber): The green power LED should be lit. If the Power LED is not lit, check the connections and check to see if the power outlet is controlled by a wall switch that is turned off. If the LED is blinking, a firmware upgrade is in process. If the LED is amber, the access point is performing a self-test. 2. WPS (green): The WPS LED blinks green when there is WPS activity 3. WLAN (blue): The WLAN LED is on steady when the wireless access point is running. The LED blinks when there is wireless activity. If the LED is off, the wireless is turned off. 4. LAN (green/amber): A green LAN LED indicates 100 Mbps speed. An amber LAN LED indicates 10 Mbps speed. Blinking indicates activity. 5. Wireless On/Off: Turns the wireless radio on or off. 6. WPS button: Push to automatically configure settings. 7. Power socket. 8. Power On/Off. 9. Ethernet ports. 10. Reset factory defaults. 2. Configure LAN and wireless access. a. Configure the access point Ethernet port for LAN access. Connect to the access point by opening your browser and entering in the address field. A login window displays. b. When prompted, enter admin for the user name and password for the password, both in lower case letters. c. The NETGEAR® Wireless N150 Access Point WN604 user interface displays. d. Select Wireless Settings under the Setup menu on the left navigation pane and configure your wireless interface for wireless access. e. Under Security, select WEP/WPA Settings and configure the level of data encryption security for your network. See the online help or the online reference manual for full instructions. f. In the left navigation pane under Setup, select Basic Settings,and configure the IP settings for your network. Tip: Before you deploy your access point, reserve an IP address (based on the WN604’s MAC address) on the DHCP server. That way, you can configure the access point with a static IP address that you can always use to log in to make future configuration changes. Deploy the WN604 Now that you have finished the setup steps, you are ready to deploy the access point in your network. If necessary, you can now reconfigure the PC you used in step 1 back to its original TCP/IP settings. 1. Disconnect the access point from the computer and place it where you will deploy it. The best location is elevated, such as a wall, ceiling, or the top of a cubicle. The access point should be placed near the center of your wireless coverage area and within line of sight of all the mobile devices. 2. Connect an Ethernet cable from your access point to a LAN port on your router, switch, or hub. 3. Connect the power adapter to the access point and plug the power adapter into an AC power outlet. The Power, WLAN, and LAN LEDs should light up. Verify Wireless Connectivity Before installing in a remote location, use a computer with an 802.11g, 802.11b, or 802.11n wireless adapter and verify connectivity. Use a browser such as Netscape®, Internet Explorer, or Mozilla Firefox® to connect to the Internet, and check for file and printer access on your network. Troubleshooting Tips Here are some tips for correcting simple problems you might have. The access point has no power. There is a hardware connection problem. The access point’s antennas are not working. Check these items: Confirm that the network is connected to the Internet. The problem could be with the router and not with the access point. There is a configuration problem. Check these items: Technical Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at Registration is required before you can use the telephone support service. Registration through th...