Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Allied Telesis Dateigröße: 3.11 mb Dateiname: Unterrichtssprache:

2. When the Found New Hardware Wizard window opens, click Next to continue. 3. The next window prompts you to install device drivers. Select Search for a suitable driver for my device (recommended), and click Next. 32 4. When the Locate Driver Files window opens, uncheck Floppy disk drives, select the CDROM drives checkbox, and click Next. 5. When the Driver Files Search Results window opens, click Next. 6. When the Digital Signature Not Found window opens, click Yes to copy the driver files. 33 7. Click Finish to complete the installation. Installing Drivers For Windows XP 1. Power on your computer and insert the HomePortal Setup Wizard for Windows XP CD into your CD-ROM drive. 2. When the Found New Hardware Wizard window opens, select Install from a list or specific location (Advanced) and click Next to continue. 3. When prompted to choose your search and installation options, ensure that the Search removable media (floppy, CD-ROM) checkbox is selected. 34 4. If the Hardware Installation window opens, click Continue Anyway to copy the driver files. If the Hardware Installation window does not open, continue to step 5. 5. Click Finish to complete the installation. 6. To manually configure the Windows XP wireless client, refer to Appendix B. 35 Appendix B Third-party Wireless Adapter Configuration After your 802.11b wireless adapter is installed in your computer, you must configure it to communicate with the HomePortal. This section describes how to configure a variety of third-party wireless Ethernet (IEEE 802.11b) adapters to operate with the HomePortal: Agere ORiNOCO PC Card - Silver or Gold Page 37 Cisco Aironet 340 Series 11Mbps Wireless LAN Adapter Page 39 D-Link Air DWL-650 Page 41 Apple AirPort card Page 43 Other wireless Ethernet adapters Page 44 Wireless configuration with Windows XP Page 44 Note: The instructions for Agere, Cisco, and D-Link adapters are for computers running Windows 98. The instructions for the Apple card are for computers running MacOS 9.0. Because not all Windows and Macintosh versions respond to new hardware in the same way, screens may appear in a different order and may have a slightly different appearance than the screens shown in these instructions. Locate the serial number and wireless encryption key Your HomePortal is configured with unique security parameters that must be configured into your wireless adapter. On the bottom of your HomePortal you will find two important pieces of information required for configuring your adapter: the serial number and the wireless encryption key. After you have located the serial number and wireless encryption key, perform the following steps to configure your wireless adapter. 36 Agere ORiNOCO PC Card - Silver or Gold Consult the documentation provided with your wireless adapter to install the Agere ORiNOCO PC Card - Silver or Gold, then follow these steps: 1. From the Start menu, select Programs > ORiNOCO > Client Manager. The ORiNOCO Client Manager screen appears. 2. From the Actions menu, select Add/Edit Configuration Profile. 3. The Add/Edit Configuration Profile screen appears. 4. To create your profile, click Add. The Edit Configuration screen appears. Enter a profile name in the Profile Name field. The profile name identifies your wireless profile, and should be no more than 29 characters in length. 5. From the Network Type pull-down menu, select Access Point. 37 6. To identify your network, click Next. The Edit Configuration screen appears. 7. In the Network Name field, enter the word “2WIRE” followed by the last three digits of your HomePortal serial number, located on the bottom of your HomePortal. This is the Wireless Network Name. The Wireless Network Name is case-sensitive, so it is important that you enter the word “2WIRE” in capital letters. 8. Click Next. In the Set Security field, check the Enable Data Security checkbox. Verify that the Use Hexadecimal (0-9, a-f, A-F) radio button is selected. 9. In the Key field, enter your ten-digit Wireless Encryption Key, located on the bottom of your HomePortal. 10. Verify that Key 1 is selected in the Encrypt data with pull-down menu (this is the default). 11. To select a power management option, click Next. The following screen appears. 12. Select the power management option that you wish to use (the default is Off), and click Next. 38 13. In the TCP/IP Behavior field, check the Renew IP Address when selecting this profile checkbox. 14. Click Finish. The following screen appears. 15. Click OK. Cisco Aironet Consult the documentation provided with your wireless adapter to install the Cisco Aironet adapter, then follow these steps: 1. Double-click the Aironet Client Utility icon on your desktop. The Aironet Client Utility screen appears. 2. Click the Profile Manager button. The Profile Manager screen appears. 3. Click Add. 39 4. In the Profile Management field, enter your profile name. The profile name identifies your wireless profile, and should be no more than 29 characters in ...

Herunterladen

Geben Sie zwei Ziffern: