Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
This warranty does not cover external fi nish (except at date of original purchase) or labor costs not specifi cally authorized by Fisher Manufacturing Company. A full and complete copy of our One Year limited warranty is available upon request. #8253 - Service Sink Faucet: Long Spout with Wall Bracket, Vacuum Breaker, Polished Chrome #2445 - Service Sink Faucet: Short Spout, Vacuum Breaker, Polished Chrome KEEP THIS MANUAL FOR FUTURE REFERENCE ANSI/A112.18.1M, ANSI/NSF 61.9 fisher manufacturing company - toll free: 800-421-6162 fax: 800-832-8238 sher-mfg.com MANFACTURING COMPANY PO BOX 60, TULARE, CA 93275 (800)421-6162, FAX: (800)832-8238 2000-7500 SCREW 2000-8000 RED BUTTON AND 2000-8001 BLUE BUTTON 2000-2301 LEVER HANDLE 2000-3002 BIBB CAP 10464 DUCK GASKET 2000-5000 WASHER 2000-3405 LH CHECK STEM OR 2000-3407 RH CHECK STEM 2000-6000 SPRING 2000-0001 RETAINER ASSEMBLY 10456 LUBE 2000-0004 RH CHECK STEM REPAIR KIT OR 2000-0005 LH CHECK STEM REPAIR KIT 8253 SERVICE SINK FAUCET Replacement Parts for Sevice Sinks PART NO. 40665 REV. A 1792 ANGLE STOP WITH KEY 1790-1 ANGLE STOP W/ CROSS HANDLES 2445 SERVICE SINK FAUCET 10049 (24”) 10006 (36”) SUPPLY LINE 1/2” M X 1/2”F 8250-2300 WALL FLANGE 8250-3300 ROD ADJUSTER 8250-3302 SUPPORT ROD 3200-2306 ECCENTRIC FLANGES 3200-2307 1/2” ECCENTRICS 2200-5000 ECCENTRIC GASKETS 2400-2103 ELBOWS 2200-0000 NIPPLE KIT 29203 EZ INSTALL KIT FOR T&S 34673 EZ INSTALL KIT FOR CHICAGO 3990-8001 VACUUM BREAKER REPAIR KIT FOR 1/2” NPT 2902-7402 WALL BRACKET SCREW 8254-7000 SCREW PST [196.9mm-209.6mm] 7-3/4"-8-1/4" [196.9mm-209.6mm] 7-3/4"-8-1/4" Installation Instructions for Pre-Rinse Units BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION REGARDING BACKFLOW PREVENTION Installation Notes: • Be sure to shut off water supply before beginning. • Use pipe thread sealant such as PST on all threaded joints. • Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier. Tools Required for Installation • Medium Sized Crescent Wrench • Pipe Thread Sealant • Phillips Screwdriver • 7/16” Drill Bit Installation Instructions READ BEFORE INSTALLATION: Before removing any existing T&S, Chicago, CHG, or Dormont hardware, read the instructions on next page labeled “EZ Install Adapter Instructions” 1. Insert the eccentric gasket into the groove on the eccentric. Making sure gasket is in place, loosely mount the eccentric and fl ange onto the control valve body. 2. Mount control valve body to either a wall with male supply nipples, or a backsplash with nipples (not included). Be sure to use pipe thread sealant on the supply nipple threads. Adjust the eccentrics as needed in order to mount the control valve level. Once level, tighten the eccentrics. 3. To install the wall bracket, fi rst attach the rod adjuster to the rod. Do not completely screw the adjuster onto the rod in case some future adjustment is necessary. Using one of the small screws, at...
Dieses Handbuch ist für folgende Modelle:Plumbing - 8253 (327.45 kb)