Stimmen - 1, Durchschnittliche Bewertung: 3 ( )

Hersteller: Jonsered Dateigröße: 1.55 mb Dateiname: Unterrichtssprache:

• NOTE! Never use a machine without the possibility of calling for help in the event of an accident. 2.Avoid usage in unfavourable weather conditions. For example, thick fog, heavy rain, strong winds or extreme cold, etc. To work in bad weather conditions is tiring and can create dangerous circumstances, e.g. slippery surfaces, affect a tree‘s direction of fall, etc. 3.Make sure you can walk and stand safely. Look out for any obstacles with unexpected movement (roots, stones, branches, pits, ditches, etc.). Take great care when working on sloping ground. 4.Take great care when cutting a tree that is subject to tension. A tree that is under tension can spring back to its original position both before and after being cut. Incorrect positioning on your behalf or when positioning the cut can result in the tree hitting you or the machine so that you lose control. Both situations can cause serious personal injury. 5.The engine should be switched off before moving. When moving over longer distances and transporting the transport guard should be used. 6.Never put the machine down with the engine running unless you have good sight of it. 12 – English SAFETY INSTRUCTIONS Adjusting the harness and clearing saw WARNING! ! When working with the clearing saw it should always be hooked in the harness. If this is not done, you cannot control the clearing saw safely and this can result in injury to yourself or someone else. Never use a harness with a defective quick release catch. Quick release On the front is an easily accessible, quick release catch. Use this if the engine should catch fire or in any other emergency situation when you quickly need to take off the harness and machine. Even load on the shoulders A well-adjusted harness and clearing saw significantly facilitates working. Adjust the harness for the best working position. Tension the side straps so that the weight is evenly distributed across the shoulders. Correct height 1) Forestry clearing Adjust the carrier strap so that the suspension hook comes approximately 10 cm under the hip. The blade should be angled forward a little. 2)Grass clearing The suspension hook should hang approximately 20 cm under the hip so that the blade is parallel to the ground. Correct balance 1)Forestry clearing Move the suspension eye forwards or backwards. If the blade is balanced a 1020 cm above the ground it is easier to avoid stones. 2)Grass clearing Let the blade balance at a comfortable clearing height, i.e. close to the ground. Basic clearing techniques • Always drop to idling speed after each working operation. Longer periods running at full throttle without loading the engine (that is without resistance, which the engine feels from the cutting equipment when trimming) can lead to serious engine damage. Designations • Forestry clearing is a general term for cutting small trees where each stem is cut individually. A saw blade is used. • Brush cutting is a general term for clearing grass. Grass blades are used for this purpose. • Grass trimming is a general term for light clearing, e.g. around edges or around trees. A trimmer head or plastic blade is used. ! ! WARNING! Sometimes branches, grass or wood can get caught between the guard and cutting equipment. Always stop the engine when cleaning. English – 13 SAFETY INSTRUCTIONS Clearing‘s ABC A. Always use the correct equipment. B. Always have well adjusted equipment. C. Follow the safety instructions. D. Organise the work well. E. Always use full throttle when applying the blade. F. Always use a sharp blade. G. Avoid stones. H. Guide the direction of fall (use the wind). ! WARNING! Avoid cutting in the cutting region between 12 and 3 o‘clock on the blade. Kickback can occur due to the blade‘s rotation speed in this area of the blade when applied on thick stems. Working methods • Before you start clearing, check the clearing area, its condition, slopes, if there are stones, pits, etc. • Thereafter start at the end which is easiest, and make a good start to the clearing. • Work systematically to and from and across the area. Each stroke should encompass a working area of 4-5 metres. This then utilises the full working area of the machine in both directions and provides the operator with an easy and variable working area to work through. • The length of the pathway should be approx. 75 m. Move the fuelling station as work progresses. • On sloping ground the pathway should run parallel to the slope. It is far easier to work along a slope then up and down a slope. • The pathway should be planned so that you avoid going over ditches or other obstacles. Also adapt the pathway to the wind conditions so that the cleared stems fall on the part of the stand that has been cleared. Forestry clearing using a saw blade • When applying the blade to heavier stems the risk of kickback increases. You should therefore avoid applying the blade on the cutting area between 12 and 3 o‘clock. • To fell to the left, the lower section of the tree shoul...

Herunterladen

Geben Sie zwei Ziffern: