Stimmen - 3, Durchschnittliche Bewertung: 3 ( )

Hersteller: Husqvarna Dateigröße: 1.8 mb Dateiname: Unterrichtssprache:

If contact is made with a hard object, stop the engine and inspect the cuttingattachment for damage. Product Description Using the illustration as a guide, familiarize yourself with your machine and its various com- ponents. Understanding your machine helps ensure top perfor- mance, long service life and safer operation. Cutting Attachment Shield C282 Outer Tube Brushcutter blade Gearcase Throttle interlock Throttle Ignition Spark plugMufflerFuel Tank Hanger Handlebar Strap withProtector WARNING! Do not make unauthorized modifications or alterations to any of these units or their components. Shindaiwa must authorize alterations and modifications in writing. Unauthorized modifications or alterations may alter the machine operation and could jeopardize personal safety during operation. Specifications Model Name C282 Engine Type 2-cycle catalyst Displacement 28.9 cc / 1.8 cu. in. Bore and Stroke 30 x 35 mm / 1.2 x 1.4 in Dry Weight (less attachment) 7.0 kg / 15.5 lb. Dimensions (L x H x W) mm 1783 x 345 x 314 mm / 70.2 x 13.6 x 12.4 in. Fuel Tank Capacity 750 mL / 25.4 oz. Fuel/Oil Ratio 50:1 with *ISO-L-EGD or JASO FD class engine oil Carburetor Type Walbro, WYK, diaphragm-type Air Cleaner Type Non-reversible foam filter element Ignition One-piece electronic, transistor-controlled Spark Plug BPMR6A Electrode Gap 0.6 mm/ .024 in. Torque 16.7 - 18.6 N•m / 148-165 in • lbf Stopping Method Slide Switch Starting Method Recoil Starter Transmission Type Automatic, centrifugal clutch w/bevel gear Handle Type Bicycle type Engine Idle Speed 2,750 RPM Clutch Engagement Speed 3,800 RPM Wide Open Throttle Speed (W.O.T.) 11,500 RPM Specifications are subject to change without notice. Emission Control (Exhaust & Evaporative) EPA 2010 and Later and/or C.A.R.B. TIER III The emission control system for the engine is EM/TWC (Engine Modification and 3-way Catalyst) and for the fuel tank the Control System is EVAP (Evaporative Emissions) or N (for nylon tank). Evaporative emission may be applicable to California models only. An Emission Control Label is located on the unit. (This is an EXAMPLE ONLY; information on label varies by engine FAMILY). PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD) The 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual. Assembly This unit comes fully assembled with the exception of the handlebar, cutting attachment shield and cutting attachment. IMPORTANT! The terms “left”, “left-hand”, and “LH”; “right”, “right-hand”, and “RH”; “front” and “rear” refer to directions as viewed by the operator during normal operation. Handlebar Assembly Install the handlebar: 1. Remove four (4) upper cap retaining screws, and remove upper c...

Herunterladen

Geben Sie zwei Ziffern: