Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Maxim Dateigröße: 1.09 mb Dateiname: Unterrichtssprache:

Keep machine, attachments, and accessories in safe working condition. 2. Check shear bolts, engine mounting bolts, and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working order. 3. Never store the machine with fuel in the fuel tank inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers, and the like. Allow the engine to cool before storing in any enclosure. BELT COVER, BELTS, AND PULLEY REF PART # QUAN DESCRIPTION 701 271686 1 Crankshaft Pulley, 5 hp 703 162035 1 Belt Bracket Assembly ( TP, RMT) 162067 Belt Bracket Assembly (RMT55H) 703-A 359215 Belt Bracket Assembly (MT) 704 272201 1 Belt, V Drive for Units with 9” Pulley 272213 1 Belt, V Drive for Units with 7” Pulley 712 336671 1 Pulley, 9” for TP and MT 336665 1 Pulley, 7” for RMT 714 463017 1 Key, 3/16” x 3/4” Woodruff #9 715 130733 1 Guard 130791 1 Guard, Round MT model 716 359341 1 Bracket, Lower for RMT 359216 1 Bracket, Lower for MT 719 359383 1 Key, Pulley 720 415562 2 Set Screw 5/16” 801 400176 2 Self Tapping Bolt 1/4” x 1/2” 802 400104 1 Bolt, 1/4” - 20 x 1/2 808 Engine 812 400235 1 Screw, 1/2” x 24 x 3/4” 815 359343 1 Bracket, Upper 823 445245 2 Flat Washer 824 446145 1 Lockwasher, 1/2” Heavy 825 444715 1 Locknut, 1/4” - 20 826 443106 4 Nut, 5/16” - 18 827 400194 4 Screw, 5/16” - 18 x 1 1/2” Hex Head Cap 828 446136 4 Lockwasher, 5/16” DECALS TYPE PART # QUANTITY HOLD HANDLE GRIPS WHILE CRANKING 336776 1 TINE ENGAGE LEVER 336777 1 HANDLE CROSS BRACE (TP50B) 336768-A 1 HANDLE CROSS BRACE (MT50B) 336913 1 HANDLE CROSS BRACE (RMT) 336916 1 DO NOT OPERATE WITHOUT GUARD 336720 1 TINE WARNING 336784 2 MADE IN USA 336924 1 BELT GUARD (TP50B) 336894 1 BELT GUARD (MT50B) 336914 1 BELT GUARD (RMT) 336917 1 FAST SLOW OFF (TP50B) 336766-A 1 CAUTION (OPERATOR) 336799 1 2 15 Belt and Belt Cover IMPORTANT: THIS UNIT IS EQUIPPED WITH AN INTERNAL COMBUSTION ENGINE AND SHOULD NOT BE USED ON OR NEAR ANY UNIMPROVED FOREST COVERED, BRUSH COVERED OR GRASS COVERED LAND UNLESS THE ENGINE’S EXHAUST IS EQUIPPED WITH A SPARK ARRESTER MEETING APPLICABLE LOCAL LAWS ( IF ANY). IF A SPARK ARRESTER IS USED, IT SHOULD BE MAINTAINED IN EFFECTIVE WORKING ORDER BY THE OPERATOR. IN THE STATE OF CALIFORNIA A SPARK ARRESTER IS REQUIRED BY LAW (SECTION 4442 OF THE CALIFORNIA PUBLIC RESOURCES CODE), OTHER STATES MAY HAVE SIMILAR LAWS. FEDERAL LAWS APPLY ON FEDERAL LANDS. SEE YOUR AUTHORIZED SERVICE CENTER FOR ARRESTER. WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, other reproductive harm. SET UP INSTRUCTIONS UNPACKING To assure proper operation of your Maxim Tiller, read and follow the following instructions carefully. DO NOT ATTEMPT TO LIFT THE TILLER FROM THE CARTON. 1. Do not attempt to lift the tiller from the carton. After opening the top, cut all four corners and lay the sides flat on the floor or working space. Take out all unassembled part...

Herunterladen

Geben Sie zwei Ziffern: