Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Electrolux Dateigröße: 1.2 mb Dateiname: Unterrichtssprache:

Note the illustrations at the beginning of the manual. Every section of the text in the manual refers to the illustration bearing the same letter Key to symbols Safety apparel: Approved protective goggles or visor, approved hard hat and hearing protection Warning Read the instructions for the user carefully and make sure you understand how all the controls work. Safety apparel: Approved gloves ENGLISH - 1 Do not smoke when Safety apparel: refueling or using the Approved boots machine Choke closed Choke open (Hot ignition) (Cold ignition) B - Description of the safety devices on the machine, Controls and maintenance necessary to ensure safe conditions WARNING! Never use the machine for any reason with its safety devices out of order • This section describes the safety devices installed on the machine, the controls and maintenance to perform to keep them in perfect working order. • The general description section will help you to identify the parts described in this section. • The risk of accidents is greatly increased if maintenance is not performed regularly or is not performed professionally. In case of doubts, contact an authorized service center. B1 Safety lever • This device was developed to prevent accidental pressing of the throttle control trigger A. The trigger A only works if it is pressed at the same time as the safety lever B. When the handle is released, two separate springs return the throttle trigger A and the safety lever B automatically to their original positions. B1 Stop button • When the Stop button C is pressed in the direction indicated by the symbol, the engine shuts down. • To check correct operation, start the engine and make sure it shuts down when the Stop button C is switched to the Stop position. B2 Blade guide • The blade guide (A) is an important device developed to prevent accidental contact between parts of the body and the blades. • Periodically, check the conditions of the device and have it replaced, if necessary, by an authorized service center. B3 Hand guard • The hand guard (B) prevents any accidental contact of the hands with the blade unit. • Periodically, and always after any violent impact to the guard, check its conditions. B3 Safety lever on front handle • This hedge trimmer is equipped with a safety device (C) that greatly reduces the risk of accidents, because if the machine is not gripped with both hands, this safety device prevents the engine from racing even if the accelerator is pressed all the way down, and holds the blades locked. • To check correct operation of this important device, try to press the accelerator all the way down without gripping the front handle. Normally, the engine should not race and the blades should not move, otherwise the device is not working correctly and the machine should be taken promptly to a service center. B4 Vibration damping system • The vibration damping system reduces the transfer of vibrations by means of springs and shock absorbers in rubber located between ...

Herunterladen

Geben Sie zwei Ziffern: