Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
AUX INPUT jacks. Video game Video camera Connecting a Video camera equipment • Connect the video camera equipment’s output jacks to this unit’s V. AUX INPUT jacks. The V. AUX terminal is covered with a cap. Remove this cap in order to use the terminal. (See page 4 for instructions on removing the cap.) Connecting a video component equipped with S-video jacks • When marking connections, also refer to the operating instructions of the other components. • A note on the S input jacks The input selectors for the S inputs and pin jack inputs work in conjunction with each other. • Precaution when using S-jacks This unit’s S-jacks (input and output) and video pin jacks (input and output) have independent circuit structures, so that video signals input from the S-jacks are only output from the S-jack outputs and video signals input from the pin jacks are only output from the pin jack outputs. When connecting this unit with equipment that is equipped with S-jacks, keep the above point in mind and make connections according to the equipment’s instruction manuals. Monitor TV DVD player, VDP, etc. IN S-VIDEO OUT S-VIDEO OUT S-VIDEO OUT IN S-VIDEO VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO OUT B B Connecting a DVD player or video disc player (VDP) DVD/VDP • Connect the DVD player’s or video disc player’s S-video output jack to the S-VIDEO DVD/VDP IN jack using an S- video connection cord. Connecting a monitor TV MONITOR OUT • Connect the TV’s or DBS tuner’s S video input (S- VIDEO INPUT) to the jack using a S jack connection cord. S-VIDEO Connecting a TV/DBS tuner • Connect the TV’s or DBS tuner’s S-video output jack (S-VIDEO OUTPUT) to the TV/DBS IN jack using an S jack connection cord. S-VIDEO TV or satellite broadcast tuner Video deck Connecting the video decks • Connect the video deck’s S output jack (S-OUT) to the jack and the video deck’s S input jack (S-IN) to the VCR OUT jack using S jack connection cords. Connect the components’ audio inputs and outputs as described on page 11. MONITOR OUT VCR IN S-VIDEO S-VIDEO 12 Connecting a Video Component Equipped with Color Difference (Component - Y, PR/CR, PB/CB) Video Jacks (DVD Player) ENGLISH • When making connections, also refer to the operating instructions of the other components. • The signals input to the color difference (component) video jacks are not output from the VIDEO output jack (yellow) or the S-Video output jack. • Some video sources with component video outputs are labeled Y, CB, CR, or Y, Pb, Pr, or Y, R-Y, B-Y. These terms all refer to component video color difference output. VIDEO OUT Y CRCB COMPONENT DVD player Connecting a DVD player DVD IN jacks B • Connect the DVD player’s color difference (component) video output jacks (COMPONENT VIDEO OUTPUT) to the COMPONENT DVD IN jack using 75 ./ohms Y CRCB VIDEO IN COMPONENT coaxial video pin-plug cords. • In the same way, another video source with component video outputs such as a TV/DBS tuner, etc., can be connected to the TV/DBS color difference (component) video jacks. Monitor TV Connecting a monitor TV MONITOR OUT jack • Connect the TV’s color difference (component) video input jacks (COMPONENT VIDEO INPUT) to the COMPONENT MONITOR OUT jack using 75 ./ohms coaxial video pin- plug cords. • The color difference input jacks may be indicated differently on some TVs, monitors or video components (“CR, CB and Y”, “R-Y, B-Y and Y”, “Pr, Pb and Y”, etc.). For details, carefully read the operating instructions included with the TV or other component. 13 ENGLISH Connecting the antenna terminals DIRECTION OF BROADCASTING STATION AM LOOP ANTENNA (An Accessory) FM ANTENNA GROUND AM OUTDOOR ANTENNA FM INDOOR ANTENNA (An Accessory) 75 ./ohms COAXIAL CABLE AM loop antenna assembly 1 4 2 3 Connect to the AM antenna terminals. Bend in the reverse direction. Remove the vinyl tie and take out the connection line. a. With the antenna on top any stable surface. b. With the antenna attached to a wall. Mount Installation hole Mount on wall, etc. Connection of AM antennas 1. Push the lever. 2. Insert the conductor. 3. Return the lever. Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. NOTES: • Do not connect two FM antennas simultaneously. • Even if an external AM antenna is used, do not disconnect the AM loop antenna. • Make sure AM loop antenna lead terminals do not touch metal parts of the panel. 14 Speaker system connections ENGLISH ENGLISH • Connect the speaker terminals with the speakers making sure that like polarities are matched (< with <, > with >). Mismatching of polarities will result in weak central sound, unclear orientation of the various instruments, and the sense of direction of the stereo being impaired. • When making con...