Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
. • The EFFECT parameter allows you to adjust the overall C LEV*R (BAL/LEV)*/W LEV*LFE MIX/D.COMPMODEGENREWALL/SEAT (F-R/L-R)/REVEFFECT EQDOLBY MOVIE 3D MUSIC SPORTS GAME NORMAL ENHANCED C STUDIO A C STUDIO B C STUDIO C S THEATER M THEATER L THEATER N THEATER MONO MOVIE VIRTUAL ENHANCED A VIRTUAL ENHANCED B VIRTUAL REAR SHIFT VIRTUAL MULTI REAR S HALL L HALL S OPERA HOUSE L OPERA HOUSE S JAZZ CLUB L JAZZ CLUB CHURCH LIVE HOUSE ACOUSTIC KARAOKE ARENA STADIUM GAME presence of the sound field. • The volume of the rear speakers, subwoofer, and center speaker can still be adjusted even when the DIRECT PASS indicator is on. Adjustable parameters for each sound field of STR-DE715/DE615/D660Z/D560Z PRO LOGIC ENHANCED C STUDIO A C STUDIO B THEATER N THEATER MONO MOVIE S HALL L HALL JAZZ CLUB LIVE HOUSE ACOUSTIC STADIUM GAME DELAYCENTERREAREFFECTTONEMODEGENRE PRO LOGIC MOVIE MUSIC SPORTS GAME 3)2) 1) 1) 1) 3)2) 3)2) 3)2) 3)2) EFFECT: effect level WALL: wall type SEAT (F-R/L-R): seat position (front-rear/left-right) REV: reverberation time LFE MIX: low frequency effect mix D. COMP: dynamic range compression R (BAL/LEV) : rear speaker’s balance/level W LEV: subwoofer level C LEV: center speaker level EQ: equalizer parameter * The settings of these parameters are not stored separately for each sound field. They effect all the sound fields. 1) Unavailable on the STR-DE615/D560Z 2) Adjustable only when center mode is set to PHANTOM, NORMAL, or WIDE (see page 21). 3) Adjustable only when center mode is set to 3 CH LOGIC, NORMAL, or WIDE (see page 21). Note The EFFECT parameter allows you to adjust the overall presence of the sound field. Before you get started To take advantage of Dolby Surround sound, go to “Dolby Digital (STR-DE915 only)” on page 19 or “Dolby Pro Logic (STR-DE715/DE615/D660Z/D560Z only)” on page 20. These sections describe how to adjust the levels of your speaker system and customize the DOLBY (STR-DE915) or PRO LOGIC (STR-DE715/ DE615/D660Z/D560Z) sound field. Sound Adjustment Sound Adjustment Adjusting the equalizer parameters (STR-DE915 only) Adjust the equalization (bass or treble) of the front, center and rear speakers for optimum sound. The following adjustments effect all sound fields simultaneously. 1 While playing a component, press DPC MODE repeatedly until the TONE indicator lights up. 2 Use the digital processing control buttons ( / ) to select the parameter to be set and use the buttons ( / ) to select the setting. To set Select And set between bass level of the front speakers F: BASS –10.0dB and +10.0dB (in 0.5 dB steps) bass frequency of the front speakers F: BASS 99Hz and 992Hz (in 21 levels) treble level of the front speakers F: TREBLE –10.0dB and +10.0dB (in 0.5 dB steps) treble frequency of the front speakers F: TREBLE 1.0kHz and 8.6kHz (in 21 levels) bass level of the center speaker C: BASS –10.0dB and +10.0dB (in 0.5 dB steps) bass frequency of the center speaker C: BASS 99Hz and 992Hz (in 21 levels) treble level of the center speaker C: TREBLE –10.0dB and +10.0dB (in 0.5 dB steps) treble frequency of the center speaker C: TREBLE 1.0kHz and 8.6kHz (in 21 levels) bass level of the rear speakers R: BASS –10.0dB and +10.0dB (in 0.5 dB steps) bass frequency of the rear speakers R: BASS 99Hz and 992Hz (in 21 levels) treble level of the rear speakers R: TREBLE –10.0dB and +10.0dB (in 0.5 dB steps) treble frequency of the rear speakers R: TREBLE 1.0kHz and 8.6kHz (in 21 levels) 3 Repeat Step 2 if necessary. z You can turn off the equalizer adjustments without erasing them Z press EQ/TONE on the remote. Note You may hear some noise as you adjust the parameters. Adjusting the tone parameter (STR-DE715/ DE615/D660Z/D560Z only) Adjust the tone (bass or treble) of the front, center and rear speakers for optimum sound. You can adjust the tone of all sounds fields, including Dolby Surround. 1 Press DPC MODE repeatedly until the TONE indicator lights up. 2 Use the digital processing control buttons ( / ) to select BASS or TREBLE. 3 Use the digital processing control buttons ( / ) to adjust the tone level. The adjusted tone level is stored automatically. z You can turn off the tone adjustments without erasing them The tone adjustments and on/off setting are stored separately for each sound field. Press DPC MODE repeatedly to turn off the TONE indicator. Adjusting the delay time (STR-DE715/ DE615/D660Z/D560Z only) You can make the surround sound more effective by delaying the output from the rear speakers (delay time). You can select a delay time of 15, 20, and 30 ms. Set a short delay time when the rear speakers are located in a large room or far from your listening position. 1 Start playing a program source encoded with Dolby surround sound. 2 Press DPC MODE repeatedly until the SUR indicator lights up. 3 Use the digital processing control buttons ( / ) to select the delay time. The current delay time appears in the display. 4 Use the digital processing control buttons ( / ) to adjust the delay tim...
Dieses Handbuch ist für folgende Modelle:Receiver und Verstärker - STR-D560Z (591.4 kb)
Receiver und Verstärker - STR-D660Z (591.38 kb)
Receiver und Verstärker - STR-DE615 (591.38 kb)
Receiver und Verstärker - STR-DE715 (591.38 kb)