Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Sony Dateigröße: 591.38 kb Dateiname: Unterrichtssprache:

z Watching TV without the receiver (for Sony TVs only) Press TV CONTROL ON to set the remote to operate TV functions only. When you press this button, the TV turns on and switches to the TV input. If the TV does not automatically switch to the TV input, press TV/ VIDEO. z To select another component when a decoded Dolby Digital AC-3 program source is selected (STR-DE715/ DE615/D660Z/D560Z only) Press any SYSTEM CONTROL/FUNCTION button to turn off the 5.1 INPUT indicator on the main unit. Making components selectable/ unselectable You can do these settings so that certain components become unselectable even if you press AUDIO/VIDEO FUNCTION. 1 Press SET UP repeatedly to select FUNCTION HOOKUP (STR-DE915/DE715/D660Z only) or FUNC HOOK UP (STR-DE615/D560Z only). 2 Use the digital processing control buttons ( / ) to select a component. 3 Use the digital processing control buttons ( / ) to select YES (selectable) or NO (unselectable) (STR-DE915/DE715/D660Z only) or –Y– (selectable) or –N– (unselectable) (STR-DE615/ D560Z only). Notes • When the receiver accepts the signal from the S-LINK CTRL A1 jack or CTRL S (STATUS) IN or OUT jack to select that component which is set to NO on the receiver, the setting changes to CONNECT or YES automatically and the component is selected (STR-DE915/DE715 (USA, Canada) only). • If you try to select the component which is set to NO or –N– using the remote, “NO CONNECTION” (STRDE915/ DE715/D660Z only) or “CANNOT USE” (STRDE615/ D560Z only) appears in the display. Receiver Operations Receiver Operations SHIFT INPUT MODE DIRECT 0 5 9 4 8 3 7 2 6 1 VIDEO FUNCTION AUDIO FUNCTION GENRE MEMORY PRESET TUNINGTUNING TONE SUR INDEX + DISPLAY – FM / AM + FM MODE – SET UP DIRECT PASS MODE DIRECT PASS SOUND FIELD ON / OFF BASS BOOST BALANCE L R DISCRETE 5 0 1 3 9 7 4 6 2 8 10 ••• • • • • • • • • • • • •• • • • • • • • • • • • ••• • PHONES POWER SPEAKERS DPC MODE A OFF A+B B gMASTER VOLUME VIDEO 2VIDEO 1 VIDEO 3 LD / DVD TV/DBS TAPE DAT / MD CD TUNER PHONO RLVIDEO AUDIO VIDEO 3 INPUT POWER TUNING +/– AUDIO FUNCTION DISPLAY DIRECTFM MODE Receiver Operations Receiver Operations Presetting Radio Stations You’ll most likely want to preset the receiver with the radio stations you listen to often so that you don’t have to tune in the station every time. The receiver can store a total of 30 FM or AM stations. You can store the stations on preset numbers combining 3 characters (A, B and C) and numbers (0-9). For example, you can store a station as preset number A1, B6, or C9. PRESET TUNING +/– Numeric buttons SHIFT INPUT MODE DIRECT 0 5 9 4 8 3 7 2 6 1 VIDEO FUNCTION AUDIO FUNCTION GENRE MEMORY PRESET TUNINGTUNING TONE SUR INDEX + DISPLAY – FM / AM + FM MODE – SET UP DIRECT PASS MODE DIRECT PASS SOUND FIELD ON / OFF BASS BOOST BALANCE L R DISCRETE 5 0 1 3 9 7 4 6 2 8 10 ••• • • • • • • • • • • • •• • • • • • • • • • • • ••• • PHONES POWER SPEAKERS DPC MODE A OFF A+B B gMASTER VOLUME VIDEO 2VIDEO 1 VIDEO 3 LD / DVD TV/DBS TAPE DAT / MD CD TUNER PHONO RLVIDEO AUDIO VIDEO 3 INPUT MEMORY SHIFT AUDIO FUNCTION 1 Press AUDIO FUNCTION repeatedly until the TUNER indicator lights up. The last received station is tuned in. 2 Tune in the station you want. If you are not familiar with how to tune in a station, see “Receiving Broadcasts” on page 15. 3 Press MEMORY. “MEMORY” appears for a few seconds. Do Steps 4 and 5 before “MEMORY” goes out. 4 Press SHIFT to select a memory page (A, B or C). Each time you press SHIFT, the letter “A,” “B” or “C” appear in the display. 5 Press the number you want to use (0 to 9). If “MEMORY” goes out before you specify the preset number, start again from Step 3. 6 Repeat Steps 2 to 5 to preset other stations. To change a preset station Preset a new station on the number you want to change. Note If the AC power cord is disconnected for about one week, the preset stations will be cleared from the receiver’s memory, and you will have to preset the stations again. Tuning preset stations (preset tuning) You can tune directly to a preset station by entering its preset number. If you don’t know which stations are preset on which numbers, you can tune by scanning the preset stations. 1 Press AUDIO FUNCTION repeatedly until the TUNER indicator lights up. The last received station is tuned in. 2 Press SHIFT to select a memory page (A, B or C), then press the number. For example, select A and then press 7 to tune in the station preset as A7. z You can tune by scanning the preset stations Press AUDIO FUNCTION repeatedly until the TUNER indicator lights up, and then press DISPLAY so that the frequency display appears. Then press PRESET TUNING + or – to select the station you want. Each time you press the buttons, the preset numbers change as follows: nA1.A2.....A0.B1.B2.....B0N. nC0....C2.C1N Indexing Preset Stations and Program Sources You can enter a name of up to 8 characters for preset stations (station index) and program sources. These index names (for example, “VHS”) appear in the receive...

Herunterladen

Geben Sie zwei Ziffern: