Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
B Press DISC/DI on the remote control repeatedly until ‘DISC 6CH’ appears on the display panel to activate the audio input source. Helpful Hint: – The audio signals produced through the 6 Channel are multi-channel surround sound. Switching to Stereo mode will not have any effect. Option 2 Option 3: Using the Coaxial In socket .. Connect the supplied coaxial cable to the COAXIAL IN socket on the receiver to the COAXIAL OUT socket on the audio/video device. To hear playback from the device, A Start playback on the connected audio/ video device. B Press DISC/DI on the remote control to select ‘COAX IN’ to activate the audio input source. Option 3 OR OR Option 4 Audio/Video device (Example only) 1_htr5204_eu_eng.indd 16 2007-02-13 11:27:45 AM Optional Connections (continued) Option 4: Using the Optical In socket • Connect a fibre optic cable (not supplied) to the OPTICAL IN socket on the receiver to the OPTICAL OUTPUT socket on the audio/video device. To hear playback from the device, A Start playback on the connected audio/ video device. B Press DISC/DI on the remote control repeatedly until ‘OPTI IN’ appears on the display panel to activate the audio input source. English 17 Getting Started English Step 1:Turning on the system Before you start... Make sure you have completed all the necessary connections before proceeding. .. Press the SOURCE button on the front panel repeatedly to select: DISC 6CH .. COAX IN .. OPTI IN ¤ MP3 MODE .. FM .. AM/MW .. AUX .. TV .. DISC 6CH.... OR .. Press DISC/DI, RADIO, TV, AUX or MP3 LINE-IN on the remote control. .. Press DISC/DI to toggle between to DISC 6CH, COAX IN or OPTI IN mode. .. Press RADIO to toggle between FM and AM/MW band. • If the audio input on this unit is connected to your TV, press TV to hear the TVs sound output through this unit. .. Press AUX to switch to the external device that is connected to the AUDIO IN-AUX socket on this unit. .. Press MP3 LINE-IN to switch to the external device that is connected to the MP3 Line-In socket on the front panel. Turn off to standby mode .. Press STANDBY-ON (2). • The display screen turns off. Step 2: Setting the speakers You can adjust the delay times (centre and rear only) and volume level for individual speakers. These adjustments allow you to optimise the sound according to your surroundings and setup. Before you start... Press SURROUND on the remote control to select Multi-channel surround mode before you adjust the speaker settings. Adjust the speaker delay times (Not available in STEREO mode) A Press STANDBY-ON (2) to turn on the unit. B Press and hold PROGRAM on the front panel for five seconds to access the system setup. To adjust the audio delay for the centre speaker • Press . or > until ‘CENTER DELAY’ appears. • Press PROGRAM on the front panel. • Rotate the VOL control to change the delay time. Select from : 5ms, 3ms, 2ms, 1ms or OFF (default setting). • To remain with the previous setting, do not rotate the VOL control in the next fi ve seconds. 18 Getting Started (continued) To adjust the audio delay for the rear speaker • Press . or > until ‘REAR DELAY’ appears. • Press PROGRAM on the front panel. • Rotate the VOL control to change the delay time. Select from : 15ms, 12ms, 9ms, 6ms, 3ms or OFF (default setting). • To remain with the previous setting, do not rotate the VOL control in the next fi ve seconds. C To confirm your settings, press PROGRAM on the front panel. D To exit from the setup menu, press . or > to select ‘EXIT’. Helpful Hints: – Use longer delay time settings when the rear speakers are closer to the listener than the front speakers. – In DISC 6CH and RADIO mode, the SETUP MENU is not available. – In STEREO mode, when CENTER DELAY, REAR DELAY or TEST TONE is selected, the display panel will show “UNAVAILABLE FOR STEREO MODE.”. Press SURROUND button to select another surround mode. – AUTO PROGRAM is only available RADIO mode only. Adjust the speaker trim level (Only available in DOLBY DIGITAL, DTS, PRO LOGIC, MOVIE, MUSIC modes) You can adjust the speakers trim level within the range of –10dB to +10dB. The default setting is 0dB. A Press and hold PROGRAM on the front panel for five seconds to access the system setup. B Press . or > until ‘TEST TONE’ appears. C Press PROGRAM on the front panel. • Each speaker will be tested automatically. • Sound will output from each speaker for two seconds. To adjust the trim level, rotate the VOL control. D Once complete, press PROGRAM on the front panel. E To exit from the setup menu, press . or > to select ‘EXIT’. Helpful Hint: – To remain with the previous setting, do not rotate the VOL control whilst the individual speaker is tested. After two seconds, the next speaker will be tested, adjust the VOL control if necessary. Adjust the speaker output levels (Not available in STEREO mode) You can adjust the rear speakers, centre speaker and subwoofer output levels by comparing the sound from the front speakers. A In ‘DISC 6CH’ mode, press SPEAKER SELECT but...