Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
– To hear 5.1 channel audio, connect HDMI cables to your Anynet+ DVD player, satellite box, etc. Then, connect the DIGITAL AUDIO OUT (OPTICAL) port on your DVD player, Satellite Box, etc. (i.e. Anynet+ Device 1 or 2) directly to the Home Theatre, not the TV. Anynet+ (HDMI-CEC) Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. . View TV Change from Anynet+ mode to TV broadcast mode. . Device List Shows the Anynet+ device list. . (device_name) Menu Shows the menu of the connected device. E.g. if a DVD player is connected, the disc menu of the DVD player will appear. . (device_name) Tools Shows the Tools menu of the connected device. E.g. if a DVD player is connected, the Tools menu of the DVD player will appear. N Depending on the device, this menu may not be available. . (device_name) Title Menu Shows the title menu of the disc in the connected device. E.g. If a DVD player is connected, the title menu of the movie in the DVD player will appear. N Depending on the device, this menu may not be available. . Receiver Sound is played through the receiver. Setting up Anynet+ (HDMI-CEC) . Anynet+ (HDMI-CEC) To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On. N When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated . Auto Turn Off Set an Anynet+ Device to turn off automatically when the TV is turned off. N If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off. N May not be enabled depending on the device. . Receiver You can listen to sound through a receiver (i.e. Home Theatre) instead of the TV Speaker. Switching between Anynet+ Devices 1. Open the Tools menu using your remote, and then select Anynet+ (HDMI-CEC). 2. Select Device List. The Device List screen appears. N If you cannot find a device you want, select Refresh to refresh the list. 3. Select a device, and then wait until the switch to the selected device is completed. N The Device List menu appears only when you set Anynet+ (HDMI-CEC) to On in the System menu. N Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while switching is in progress. N If you have selected an Anynet+ device using the Source function , you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device using the Device List function. Listening through a Receiver You can listen to sound through a receiver (i.e. Home Theatre) instead of the TV Speaker. To listen to sound through a receiver, go to Receiver screen (System > Anynet+ (HDMICEC) > Receiver). Then select Receiver and set to On. N If your receiver supports audio only, it may not appear in the device list. N The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) port of the TV. N When the receiver (i.e. Home Theatre) is set to on, you can hear sound output from the TV’ s Optical jack. When the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD player and it is connected to the TV via HDMI, you will hear only 2 channel sounds from the receiver. Using the ARC function You can listen to sound from the TV through a receiver connected using an HDMI cable without connecting a separate optical cable. To listen to sound through a receiver using the ARC function, go to Receiver screen (System > Anynet+ (HDMI-CEC) > Receiver). Then select Receiver and set to On. N To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the HDMI IN 2 (ARC) port. N To disable the ARC function, set the Receiver to Off. Even if the TV transmits the ARC signal continuously, the receiver will be blocked from receiving the signal. Troubleshooting Menu > Support > Self Diagnosis > Troubleshooting To view a list of all troubleshooting items, go to e-Manual home screen (Menu > Support > e-Manual > Other Information) or press the SUPPORT button, and then search a desired item by selecting a chapter. N When you use a SMART Interaction function, check whether the corresponding menu turned on. (Menu > System > Voice and motion control) N Voice Control function can be affected recognition by unclear pronunciation, voice level, or surrounding noise. For accurate voice recognition, refer to the Standard Voice Command list at the Samsung web site (samsung.com). N Voice Control performance may vary depending on the language. N Motion control function can be affected recognition by brightness of room and brightness of recognized face. Alternatively, recognition rate of Motion control may differ depending on the TV camera's angle or the operating speed. Therefore, we recommend to adjust a ambient brightness and TV camera's angle before using Motion control. N If you have other questions, call Samsung customer Service or visit "w...
Dieses Handbuch ist für folgende Modelle:Fernseher - PS43E497B2K (2.06 mb)
Fernseher - PS51E8000GQ (2.06 mb)
Fernseher - PS51E8000GS (2.06 mb)
Fernseher - PS51E8000GU (2.06 mb)