Stimmen - 4, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Kenwood Dateigröße: 1.21 mb Dateiname: Unterrichtssprache:

** Pro Logic II Music mode only. 2 Use the MULTI CONTROL knob or Joystick to adjust the setting as desired. • The adjustment item is displayed for approximately 8 seconds. 25 EN 26 EN Midnight mode (Dolby Digital mode only) When watching movies at night , you might not be able to raise the volume as loud as normal. Midnight mode compresses the dynamic range of previously specified parts of the Dolby Digital sound track (like scenes with sudden increases in volume) to minimize the difference in volume between the specified and non-specified parts. This makes it easy to hear all of the sound track, even when listening at low volumes. 1 Press the SOUND key repeatedly until “NIGHT” appears on the display. • This can be selected only if CD/DVD, DVD/6CH or VIDEO 2 is selected as the source and the listen mode is set to “DOLBY DIGITAL.” 2 Use the MULTI CONTROL knob or Joystick to select the ON or OFF setting. • The adjustment item is displayed for approximately 8 seconds. • Some Dolby Digital software may not be compatible with the Midnight mode. Panorama mode (Pro Logic II Music mode only) When listening to music, you will be able to enjoy the “wraparound” sound effect when you adjust the panorama mode. 1 Press the SOUND key repeatedly until “PANORAMA” appears on the display. • The PANORAMA setting indication scrolls across the display. “PANORAMA” will be scrolled from right to left. 2 Use the MULTI CONTROL knob or Joystick to select PANORAMA ON or OFF. 1 ON : PANORAMA mode is ON. 2 OFF : PANORAMA mode is OFF. Dimension mode (Pro Logic II Music mode only) When listening to music with certain recordings, you will also be able to achieve a suitable balance from all the speakers by adjusting the dimension mode. 1 Press the SOUND key repeatedly until “DIMENSION” appears on the display. • The DIMENSION indication scrolls across the display. 2 Use the MULTI CONTROL knob or Joystick to adjust the soundfield towards the rear or the front. Soundfield is adjusted towards the front. Soundfield is in neutral position. Soundfield is adjusted towards the rear. Center Width mode (Pro Logic II Music mode only) Center width adjustment allows you to enjoy an enchanced sound when listening to music through center image from only center speaker, or left and right speakers or various combinations adjustments. 1 Press the SOUND key repeatedly until “CENTER WIDTH” appears on the display. • The CENTER WIDTH indication scrolls across the display. • When the center speaker is switched OFF, this mode will not be effective. 2 Use the MULTI CONTROL knob or Joystick to adjust the leftcenter- right output. Center image will be heard from center speaker only. Center image will be heard from left and right speakers only. • When in other positions, center image from center speaker, left and right speakers can be heard simultaneously with various combinations. Ambience effects Ambience effects Ambience effects It is easy to adjust the volume of the subwoofer using the remote control. 1 Press the SOUND key repeatedly until “SW” appears on the display. 2 Use MULTI CONTROL knob or keys to adjust the volume. • The adjustment range is –10 dB to +10 dB. Display dimmer adjustment The dimmer function lets you select the brightness of the receiver's display. You might find this useful if you darken your room to watch movies or listen to music. Each time you press the DIMMER key, the display brightness changes among the three available settings. Select the brightness level you find most pleasing. • For the remote control, this function can be operated from the 8 key. 96kHz LPCM playback The receiver is compatible with the 96kHz LPCM playback. To play a 96kHz DVD, set the listen mode to “STEREO”. • In F-AUTO input mode, the listen mode will automatically be STEREO. • When in D-MANUAL input mode (listen mode is not STEREO), “FS 96kHz” will appear in the display and no sound can be heard from the speakers. Press the LISTEN MODE key (the listen mode changes to the STEREO mode) to output sound from the speakers. 27 EN Basic remote control operations for other components The remote control supplied with this receiver is also capable of controlling components from a variety of manufacturers once you register the appropriate setup codes into the remote control unit. Low battery warning Replace all two batteries with new ones when you notice a shortening of the distance from which the remote control will operate. After changing batteries, please re-enter the setup codes. Registering setup codes for other components SOURCE REMOTE MODE Numeric keys INPUT SELECTOR 1 Find the setup code of the component to be registered. • Refer to the setup code lists to find the setup code for the component to be registered. . Example: To register a DVD made by KENWOOD, you would enter “805”. Input Component Maker Code Key (DVD) DVD player KENWOOD 805, 808 DVD 2Registering components for REMOTE MODE (DVD, CBL, DSS/SAT, VCR, TV, OTHERS) keys. 1 For DVD, CBL, DSS/SAT, VCR or TV keys; Ho...

Herunterladen

Geben Sie zwei Ziffern: