Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Kenwood Dateigröße: 760.77 kb Dateiname: Unterrichtssprache:

DIGITAL-MANUAL : The inputs are fixed at digital signals and the listen modes should be switched manually by the user. The DIGITAL-AUTO and DIGITAL-MANUAL modes are switched automatically to the FULL AUTO mode when an input is switched or the receiver is set to OFF. ANALOG : The inputs are fixed at the analog 2-channel inputs. 6CH INPUT : The inputs are fixed at the analog 6-channel inputs. This mode can be selected only when the DVD input is selected with the input selector. Using Using Receiver How Do I Adjust the Sound? Switching Input modes To fully enjoy the sonic benefits of specially-encoded DVD AUDIO discs played on a compatible DVD player, you must set the receiver’s input to 6CH INPUT. When you are finished listening to analog media, set the receiver’s input back to FULL AUTO. 1. Press the INPUT MODE key on the receiver or press the F.SHIFT = SOUND (INPUT MODE)* key on Remote Control unit. 2. Repeat step 1 until the desired input mode is displayed. Input Status Analog F.AUTO • If you turn off the receiver, select a different source device, the “Digital Auto” or “Digital manual” is reset to “Full Auto”. • When you use “Digital Auto” or “Full Auto” mode with certain DVD and LD players, performing operations such as “Skip” or “Stop” may momentarily interrupt the output. * When an operation is described as [F.SHIFT =SOUND (INPUT MODE) key], for example, press the F.SHIFT key and press the Next key (the SOUND (INPUT MODE) key in this case) within 8 seconds. How Do I Adjust the Sound? Applying Digital Signal Processor (DSP) Effects The DSP mode creates the reverberation devices (elements of sound echoed in various spaces) which determine the feeling of presence. Since DSP uses digital processing, it can produce these effects without soiling the sound quality of the original music or video source. The DSP mode lets you add the atmosphere of an Arena, Jazz Club, Stadium, Cathedral or Theater from any PCM or analog input source. These modes are particularly effective when used with stereo program sources like CD, television and FM radio. You might enjoy trying the STADIUM or ARENA mode the next time you watch a sporting event or concert. You can adjust the following elements to create a customized environment: • The WALL TYPE parameter lets you adjust the brightness of the sonic environment according to your preference. • The ROOM SIZE parameter lets you adjust the size of the sonic environment according to your preference. • The EFFECT level lets you adjust the amount of DSP “presence” in the sonic environment according to your preference. Using Using Receiver How Do I Adjust the Sound? Setting a DSP effect Press the receiver’s LISTEN MODE key or Remote Control unit’s LISTEN M. key repeatedly until the desired listen mode is displayed. Listen Mode DSP Arena F.Auto • The DSP mode can be set to Arena, Jazz Club, Stadium, Cathedral or Theater. • The DSP mode can be selected only when the current input is PCM (except for 96k fs) or Analog. To customize the DSP effect: 1. Press the SOUND key and press the Next key repeatedly until “DSP Wall Type” is displayd on Remote Control unit. 2. Press the LCD cursor up/down ( / ) key on Remote Control unit to select Soft, Medium or Hard. 3. Press Remote Control unit’s Next key to display DSP Room Size. 4. Press the LCD cursor up/down ( / ) key on Remote Control unit to select Small, Medium or Large. 5. Press Remote Control unit’s Next key or the receiver’s SOUND key to display DSP Effect Level. 6. Press the LCD cursor up/down ( / ) key on Remote Control unit to select one of Level 1 to Level 5. then press the HOME key. Operating on the receiver: 1. Press the SOUND key repeatedly until to display DSP Wall type. 2. Press the MULTI CONTROL (%/.) key to select SOFT, MEDIUM or HARD. 3. Press the SOUND key to display DSP Room Size. 4. Press the MULTI CONTROL (%/.) key to select SMALL, MEDIUM or LARGE. 5. Press the SOUND key to display DSP Effect Level. 6. Press the MULTI CONTROL (%/.) key to select one of Level 1 to Level 5, then press the SOUND key repeatedly until “SOUND FIXED” is displayed. How Do I Adjust the Sound? HDCD® and D.R.I.V.E. Effects HDCD is a new format enabling recording with higher quality than previous CD while maintaining compatibility with it. Although a HDCD- compatible CD player is usually required to exhibit the full characteristics of the HDCD, this receiver is capable of reproducing high-quality HDCH signals by connecting a CD player through digital connection, even if it does not incorporate the HDCD circuitry. D.R.I.V.E. is a KENWOOD original technology for reproducing signals with high resolution by instant switching of the internal digital adaptive filters according to the input signal. This receiver incorporate a high performance DSP to provide very high resolution from 32-bit DRIVE III circuitry, achieving stereo audio reproduction with the best quality ever reached. The D.R.I.V.E. indicator lights when the D.R.I.V.E. circuit is activated. The H...

Herunterladen

Geben Sie zwei Ziffern: