Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Receiver und Verstärker - STR-DB1080 (1.28 mb)
Receiver und Verstärker - STR-DB1080 (1.9 mb)
Anleitung Zusammenfassung
• If you move to another area, repeat this procedure to store stations in your new area. • For details on tuning the stored stations, see page 28. • If you move the antenna after storing stations with this procedure, the stored settings may no longer be valid. If this happens, repeat this procedure to store the stations again. Presetting radio stations You can preset up to 30 FM or AM stations. Then you can easily tune in the stations you often listen to. Presetting radio stations 1 Rotate FUNCTION to switch the function to TUNER. 2 Tune in the station that you want to preset using Automatic Tuning (page 25) or Direct Tuning (page 26). 3 Press MEMORY. “MEMORY” appears in the display for a few seconds. Do steps 4 to 5 before the display goes out. 4 Press PRESET TUNING + or – to select a preset number. If “MEMORY” goes out before you select the preset number, start again from step 3. 5 Press MEMORY again. The station is stored to the selected preset number. If “MEMORY” goes out before you press MEMORY, start again from step 3. 6 Repeat steps 2 to 5 to preset another station. continued Amplifier/Tuner Operation 27GB Presetting radio stations (continued) Tuning to preset stations 1 Rotate FUNCTION to switch the function to TUNER. The last received station is tuned in. 2 Press PRESET TUNING + or – repeatedly to select the preset station you want. Each time you press the button, you can select the preset station as follows: nA1.A2.....A0.B1.B2.....B0N nC0....C2.C1N Using the remote Models of area code U, CA Use the supplied remote RM-PG411. 1 Press TUNER to switch the function to TUNER. 2 Press PRESET/CH/D.SKIP +/– repeatedly to select the preset station you want. Models of other area codes Use the supplied remote RM-LP211. 1 Select “TUNER” from the FUNCTION list to switch the function to TUNER. 2 Move the easy scroll key to select the preset number you want, then press the key to enter the selection. 28 GB Using the Radio Data System (RDS) (Models of area code CEL, CEK only) This receiver also allows you to use RDS (Radio Data System), which enables radio stations to send additional information along with the regular program signal. You can use the following convenient RDS features: – Displaying RDS information – Scanning preset stations by program type Note that RDS is operable only for FM stations.* * Not all FM stations provide RDS service, nor do they provide the same types of services. If you are not familiar with the RDS services in your area, check with your local radio stations for details. Receiving RDS broadcasts Simply select a station on the FM band using direct tuning (page 26), automatic tuning (page 25), or preset tuning (page 28). When you tune in a station that provides RDS services, the RDS indicator lights up and the program service name appears in the display. Note RDS may not work properly if the station you tuned to is not transmitting the RDS signal properly or if the signal strength is weak. Displaying RDS information While receiving an RDS station, press DISPLAY. Each time you press the button, RDS information on the display changes cyclically as follows: PS (Program Service name)a) t Frequencya) t PTY (Program TYpe) indicationb) t RT (Radio Text) indicationc) t CT (Current Time) indication (in 24-hour system) t Sound field currectly applied t Volume level t Decoding information a) This information also appears for non-RDS FM stations. b) Type of program being broadcast (see page 30). c) Text messages sent by the RDS station. Notes • If there is an emergency announcement by government authorities, “Alarm-Alarm!” flashes in the display. • If a station does not provide a particular RDS service, “No XX” (such as “No Clock Time”) appears in the display. • When a station broadcasts radio text data, it is displayed at the same rate at which it is sent from the station. Any change in this rate is reflected in the display rate of the data. Scanning preset stations by program type You can tune in preset stations according to a program type that you specify. The receiver scans for stations in its preset memory currently broadcasting the specified program type. 1 Press RDS PTY. 2 Press TUNING/PTY SELECT + or TUNING/PTY SELECT – to select the program type. See the table on the next page for the information on each program type. 3 Press RDS PTY. While the receiver is scanning stations, “PTY SEARCH” appears in the display window. When the receiver finds a station, the receiver stops scanning. When the receiver could not find any preset stations currently broadcasting the specified program type, “PTY not found” appears in the display. continued Amplifier/Tuner Operation 29GB Using the Radio Data System (RDS) Program type Description (continued) indication Leisure & Hobby Programs on recreational activities Description of program types such as gardening, fishing, Program type Description indication News News programs Current Affairs Topical programs that expand on current news Information Programs offer...