|
Fotos und technische Daten American Audio VLP1500 |
Anleitung Zusammenfassung
• Do not spill water or other liquids into or on to your unit. • Do not attempt to operate this unit if the power cord has been frayed or broken. • Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of elec- trical shock and fire in case of an internal short. • Disconnect main power before making any type of connection • Do not remove the cover under any conditions. There are no user serviceable parts inside. • Never plug this unit in to a dimmer pack. • Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall. • Do not attempt to operate this unit, if it becomes damaged. • This unit is intended for indoor use only, use of this product out- doors voids all warranties. • During long periods of non-use, disconnect the unit’s main power. • Always mount this unit in a safe and stable manner. • Power cords should be routed so they are not likely to be walked on, pinched by items placed upon or against them. • Cleaning -The outside of the unit should be wipe down with a soft cloth and mild cleaner when needed. • Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. • The fixture should be serviced by qualified service personnel when: A. The power-supply cord or the plug has been damaged. B. Objects have fallen on, or liquid has been spilled into the unit. C. The appliance has been exposed to rain or water. D. The fixture does not appear to operate normally or exhibits a marked change in performance. Introduction: Congratulations and thank you for purchasing this American Audio® VLP series™ amplifier. This amplifier is a representation of American Audio’s continuing commitment to produce the best and highest quality products all at an affordable price. Please read and understand this manual completely before attempting to operate your new amplifier. This booklet contains important information concerning the proper and safe operation of your new amplifier. Unpacking: Every VLP Series™ amplifier has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your unit for any damage and be sure all accessories necessary to operate the unit has arrived intact. In the event damage has been found or parts are missing, please contact our toll free customer support number for further instructions. Please do not return the amplifier to your dealer without contacting customer support first. Installation: This amplifier is designed to mount into a standard 19” rack. The front panel provides four holes used to screw the unit into a rack. The unit also provides a way to rear mount the unit into a rack for added security. Rear mounting the unit is especially recommended for this amplifier if the unit is to mounted into a mobile rack. Customer Support: American Audio® provides a toll free customer support line, to provide set up help and to answer any question should you encounter problems during your set up or initial operation. You may also visit us on the web at for any comments or suggestions. For service related issue please contact American Audio®. Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Pacific Standard Time. Voice: (800) 322-6337 E-mail: support@americanaudio.com Fax: (323) 582-2610 ©American Audio® - - VLP Series™ Power Amplifier User Manual Page 4 Front Panel VLP600 & VLP1500 5 6 3 2 1 10 9 8 7 5 4 PROFESSIONALPOWERAMPLIFIERVLP1500PROCLIPPOWER1015CH A0 dB10631803015PROCLIPPOWER1015CH B0 dB10631803015 Figure 1 1. Channel 1 Gain Control - This rotary knob is used to control the output signal of channel one. Turning the knob in a clockwise direction will increase signal output. 2. Channel 1 Protect Indicator - The red Protect LED will begin to glow when the channel goes into protect mode. When the channel goes into protect mode all output for that channel will turn off. This is to protect any speakers connected to the channel. 3. Channel 1 Clip Indicator - This red LED will begin to flash when channel one begins to overload (clip). At this point channel one will begin to distort. Under heavy clipping activity lower the channel one gain control to reduce the risk of damage to your speakers and amplifier. This LED may glow when the unit has been turned off, this is normal. 4. Channel 1 Signal Indicators - These green and yellow LED’s will glow according to the average signal output. 5. Function Indicators - These indicators detail the operating mode of the amplifier. These LEDs will also function as a power indicator. 6. Power Switch - This switch is used to control the units main power. 7. Channel 2 Signal Indicators - These green and yellow LED’s ...
Dieses Handbuch ist für folgende Modelle:Receiver und Verstärker - VLP600 (5.72 mb)