Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
Do not use this product for any other application with the exception of showing in this manual. • When installing on the automobile, do not set up the product where it may interrupt driver or damage passengers in an abrupt stop or an sudden emergency. • Any foreign materials such as water, metal parts or drinks inside of this product may cause serious defects or fire. • Do not operate this product while driving,for safety purposes. FEATURES • This is a new high technology micom-controlled/parallel applicable multi A/V control system device. • Individual 4 VIDEO & AUDIO input-source connection. • Individual 4 VIDEO & 4 AUDIO output-display connection. • 4 A/V outputs can be selected input signals independently. (Each random selection among 4 individual A/V sources). • Parallel application facility for maximum 60 A/V output. (Parallel connectable max. 20 units for 60 A/V output). • Wide operation power-range DC 11~30V for using in a passenger vehicle and/or tourist coach buses without and power coneverter for DC 24V buses. • 1. standard package contains of : • main-unit ...............................................................1 »owner’s manual .......................................................1 • IR remote controller................................................1 • BATTERY (R03, AAA, I'M I SIZE) ....................2 • REMOTE SENSER ..............................................1 • Jumper wire power connector .............................2 • Power Connector Wire ........................................... 1 • Fixing screws & washers kit...................................1 3 FUNCTIONS 1. EXTERNAL OVERVIEN © n n n o o AUDIO OUTPUT VIDEO OUTPUT O 4 AUDIO & VIDEO INPUT 4 AUDIO & VIDEO OUT CONTROLLER I-A/V INPUT SELECTOR-1 oooo oooo oooo oooo A/V1 INPUT A/V2 INPUT A/V3 INPUT A/V4 INPUT Farenhett MULTI AUDIO & VIDEO CONTROLLER AUDIO INPUT VIDEO INPUT I ; i • V2 • V4 • V1 • V3 DC12V OUTPUT POWER 1 INPUT IMPED o y U u XJ © (4) © (1) AUDIO INPUT (RCA Jack) (2) VIDEO INPUT (RCA Jack) (3) POWER CONNECTOR DC 12V OUT (4) POWER CONNECTOR DC IN (5) IMPEDANCE SELECTING SWITCH (6) AUDIO OUTPUT (RCA Jack) (7) VIDEO OUTPUT (RCA Jack) (8) IR REMOTE SENSOR JACK (9) INPUT INDICATOR 4 FUNCTIONS 2. FUNCTIONS OF A/V INPUT SIDE (1) AUDIO INPUT : 8RCA Jacks for input. (2) VIDEO INPUT : 4RCA Jacks for input. (3) POWER CONNECTOR : DC 12V OUT when your using two or more distributors, you can use DC 12V out with connector. (4) POWER CONNECTOR : DC 12V IN for single application, connect red wire to DC 12V and connect black wire to ground (5) IMPEDANCE SELECTING SWITCH for parallel applicotion by connecting A/V selector, "IMP" switch of the first and last A/V selector must be switched to "L" position, and the "IMP" switches of all the other A/V selectors must be set at "H" positions. FUNCTIONS 3. FUNCTIONS OF A/V OUTPUT SIDE (1) IR REMOTE SENOSOR JACK : connect Ir remote sensor. (2) VIDEO OUTPUT : 4 RCA Jacks for video output. (3) AUDIO OUTPUT : 8 RCA Jacks for audio output. FUNCTIONS 4. REMOTE CONTROLLER ® ® © © POWER : ON. OFF KEY © VIDEOl : SELECTOR KEY © VIDE02 : SELECTOR KEY ® VIDE03 : SELECTOR KEY © VIDE04 : SELECTOR KEY ©■ M0NIT0R1 M0NIT0R2 -□ □ A/V1 A/V1 □ □ A/V2 A/V2 □ □ A/V3 A/V3 n □ A/V4 A/V4 □ □ M0MT0R3 MONITORS □ □ A/V1 A/V1 n □ A/V2 A/V2 □ □ A/V3 A/V3 □ □ A/V4 A/V4 □ □ • How to replace the battery in the remote controller Please confirm the polarity of batteries and do not change it 7 SINGLE/MULTI APPLICATION 1. SINGLE-UNIT APPLICATION A/V signal input A/V4A/V3A/V2 A/Vl REMOTE CONTROLLER NOTE: (1) "IMP" switch must be set at "L" position(Low Impedance). (2) To USE The Remote Control, the power button to turm on the remote. (3) Please the VIDEO 1, 2, 3,4(AV1, AV2, AV3, AV4) Button to select, The source to be controlled by the remote. SINGLE/MULTI APPLICATION 2. MULTI-UNIT PARALLEL APPLICATION d w 8888 doi MONITOR 4 MONITOR )efo 3 MONITOR 1 MONITOR J (1) Max 20 units can be installed in parallel. (Max 60 A/V outputs) (2) The installation of each A/V Selector is same of single application. <5^ 'A/V4 (3) "IMP" switch of the first A/V selector must be set at" L" position ("L" : Low Impedance) and the "IMP" switch of the other A/V selector units must be set at "H" position. ("H" : High impedance). MONITOR 4 MONITOR i MONITOR I MONITOR J NOTE : In parallel application with more than 5 unit, maybe need to supply more current power by connecting power connector from car battery. SPECIFICATIONS POWERE SOURCE DC 12V/24V OPERATING VOLTAGE DC 11 V/30V POWERE CONSUMPTION 4WMax VIDEO BAND WIDTH 10 MHz AUDIO BAND WIDTH 15KHz IMPEDANCE OF VIDEO INPUT 75obm IMPEDANCE OF AUDIO INPUT 8.2K ohm OPERATING TEMPERATURE -5°C~+60°C STORAGE TEMPERATURE -30 °C ~+80 °C OPERATING HUMIDITY 85% RH STORAGE HUMIDITY 85% RH DC OUTPUT(Total 4 outputs) 3A Max DIMENSIO(TOP PART) 240 x 110 x 38mm N.B. : The above ...