Login: Be sure to remove the sticker before using the clock. • Depending on the clock model, its configuration may differ somewhat from that shown in the illustration. SETTING THE TIME 1. Slide the selector to TM SET . 2. Press HR to increase the hour digits and MIN to increase the minutes digits. Holding down either button changes its setting at high speed. •Though the seconds are not displayed, they reset to 00 when you press MIN . 3. After you set the time, change the selector to NORMAL . USING THE
Be sure to remove the sticker before using the clock. • Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the illustration. • This product has a sweep second hand. TO START CLOCK Insert a battery into battery compartment (©) with polarity as indicated. TO SET TIME Turn the hour/minute adjuster (@) in either direction. TO ADJUST SECONDS
• Though temperature readings are displayed up to –0.1°C and greater than 40.1°C, note that such readings are actually outside the guaranteed temperature range of this clock. BATTERY REPLACEMENT Replace batteries whenever the display of the clock becomes dim and difficult to read. 1. Open the battery compartment cover as shown in the illustration. 2. Remove both of the old batteries. 3. Load two new batteries. Make sure that their positive (+) and negative (–) ends face in the correct directions
• Never mix old and new batteries, or batteries of different brands. • Never charge the batteries that come with the clock. • Should batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto your skin. • Replace the batteries at least once a year, even if the current batteries are working properly. • The batteries that come with the clock lose some of their power during transport and storage. SPECIFICATIONS Accuracy at normal temperature: ±60 se
••UTC offsets and the use of summer time are subject to change in the country where they are used. ** In December 2007, the UTC offset for Caracas, Venezuela (CCS) was changed from –4 to –4.5. However, this Clock still uses the old UTC offset of –4 when the Caracas (CCS) city code is selected. ENGLISH ••Depending on the clock model, its configuration may differ somewhat from that shown in the illustration. OPERATING PRECAUTIONS •• Do not use or store this clock in areas exposed to temperature ex
Be sure to remove the sticker before using the clock. •Depending on the clock model, its configuration may differ somewhat from that shown in the illustration. Current time (Hour, minutes) Date (month – day) PM indicator Alarm time Alarm on indicator Alarm Off Snooze Alarm OnAlarm On Snooze on indicator Alarm on indicator GENERAL GUIDE 11111SNOOZE/LIGHT button •Press this button to illuminate the display for about three seconds. •Pressing this button while the alarm is sounding stops the alarm.
•Replace the battery at least once a year, even if the current battery is working properly. •The battery that comes with the clock loses some power during transport and storage. Operation Guide DQ-542/542B 2 Hour Minutes Press to toggle between 12-hour and 24-hour timekeeping. Press to advance the alarm time minute setting. Press to advance the alarm time hour setting. USING THEALARM The alarm sounds when the current time reaches the alarm time. The face illuminates for the first 5 seconds of th
Slide the selector to AL SET (ALM SET). 2. Press HR to increase the hour digits and MIN to increase the minutes digits. Holding down either button changes its setting at high speed. 3. After you set the alarm time, change the selector to NORM (NORMAL). To turn the alarm on and off Slide the selector to SNZ (SNOOZE) or AL ON (ALM ON) position to switch the alarm on, or to AL OFF (ALM OFF) position to switch it off. To use the alarm 1. Set the alarm time and switch the alarm on. 2. When the alarm
To use the alarm 1. Set the alarm time and switch the alarm on. 2. When the alarm time you set is reached, the alarm starts to sound. When alarm is sounding, press the SNOOZE/LIGHT button to stop it. When the snooze feature is turned on, the alarm will sound again in about 8 minutes. •You can stop the repeating alarm at any time by sliding the selector to AL OFF position. To view the current alarm time setting 1. Slide the selector to NORMAL . 2. Press HR or MIN to display the currently alarm ti
Alarm Mode selector Description The alarm sounds at the preset time for one minute. You can stop the alarm by pressing the SNOOZE/LIGHT button 1. The snooze feature will cause the alarm to sound again about five minutes after it stops. A indicator flashes on the display during the period between alarms. •If you keep stopping the alarm manually by pressing the SNOOZE/LIGHT button 11111The alarm will sound again, about five minutes after you stop it. •If the alarm is not stopped manually The alarm
