Login:
Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Anleitung RCA, modell RC10

Hersteller: RCA
Dateigröße: 202.1 kb
Dateiname: 7d382422-0e9a-4ba6-b142-751ffc2ba5e2.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Dieses Gerät hat auch andere Anweisungen:
Radios - RC10 (603.73 kb)enesfr

Anleitung Zusammenfassung


• Caution marking is located at bottom of apparatus. ] Technical information Product: Clock Radio Brand: RCA Model: RC10 Electrical consumption Power Supply: 120V ~ 60Hz Power Consumption: 5 Watts SNOOZE (on top of unit) – enter snooze mode where the alarm will quiet but sound again once the snooze period is over. OFF – turn off the unit. ON (RADIO) – turn on the radio. REV – set clock or wake time (decrease value). FWD – set clock or wake time (increase value). SLEEP – activate sleep function. WAKE MODE – select wake mode. SET / / – slide switch to set wake or clock time. General controls –VOLUME+ – adjust volume. BAND – select between AM and FM bands. TUNING – select radio frequencies. Radio Selecting radio mode Press ON (RADIO) to switch on radio. Switching band Slide the BAND switch on the right of the unit to select FM or AM band. Tuning the radio Rotate the TUNING knob on the right of the unit to adjust the radio frequency. Built-in AFC The Built In Automatic Frequency Control (AFC) works only on FM. It helps reducing drift on FM reception and keeping the radio locked in on the FM station to which it is tuned. When tuning in FM stations, you may notice that the station you are tuning can be well-tuned on two or three nearby points on the dial. Always tune carefully at the loudest and clearest point. AM antenna A built-in ferrite rod antenna eliminates the need for an outside antenna for AM reception. Rotating the unit slightly may improve reception of distant AM stations. Setting wake time 1. Slide the switch SET / / to position. 2. Press REV or FWD to set the wake time on the small display. • The time decrements or increments will follow by a faster rate when you press and hold the buttons. 3. Slide the switch SET / / to position. Selecting wake source You may be woken up by radio or alarm. 1. Set a wake time (see above instructions). 2. Press WAKE MODE repeatedly to select a waking mode. • Corresponding indicator lights against the wake icon on the small display. – Wake by alarm – Wake by radio • The unit equips with GRAD-UWAKE feature, the alarm tone volume will increase gradually to its maximum in about 30 to 45 seconds. • Your last tuned radio station will be the wake source if wake by radio is selected. Turning off the wake alarm or radio • To silence the wake function momentarily: To turn off the wake function, press SNOOZE on the top of the unit. The wake alarm or radio will be switched off temporarily. The alarm or radio will be on again when the snooze period (default: 9 minutes) is over. (read “SmartSnoozeTM”) • To turn off the wake alarm or radio: Press OFF. The wake alarm or radio will activate again the next day unless you switch off the Wake function. • To disable the wake function completely: Press WAKE MODE repeatedly until OFF shows on the small display. Checking wake time • The set wake time always shows on the small display with a wake mode selected. • If wake function is not activated, OFF shows on the small display. Wake function SmartSnoozeTM This operation allows extra sleep time after the wake function is on. The alarm will be off by pressing SNOOZE, ON, REV, FWD or SLEEP until the snooze period is over. Snooze function can be used repeatedly up to 60 minutes. After this, the wake function will turn off until the next day. To set the “quiet” period: 1. Press and hold SNOOZE. 2. Press REV or FWD to set the quiet period that shows on the large display. • The time decrements or increments will follow by a faster rate when you press and hold the buttons. • Snooze period can be set from 1 to 30 minutes (default: 9 minutes). 3. Release SNOOZE. SmartSnoozeTM is only available when the switch SET / / is at the position. In sleep mode, you can set the duration (up to 90 minutes) before the radio turn off automatically. To set the sleep mode: • Press SLEEP repeatedly to cycle among the sleep times available (90min, 60min, 30min, 15min and OFF. 90min is the default setting) on the large display. • The radio will be switched on. • The indicator lights against the sleep icon on the large display when sleep mode is activated. To check the remaining time in sleep mode: • Press and hold SLEEP to check the remaining sleep time on the large display. To cancel the sleep mode: • If you decide to turn off the unit sooner, press SNOOZE or OFF. Sleep function Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, NY 11788 ©2009 Audiovox Electronics Corp. Trademark(s) ® Registered Marque(s) ® Deposee(s) Marca(s) ® Registrada(s) Printed in China Warranty information 12 Month Limited Warranty Applies to RCA Audio/Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the ...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien