Stimmen - 4, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
To reduce the risks associated with tripping, falling and tipping: • Route air hoses away from traffic areas. To reduce the risks associated with hazardous air pressure: • Maintain spray equipment per 3M care and cleaning instructions in the applicable owner’s manual. • Ensure air input pressure and all applicator system regulators are properly adjusted prior to each use. • Always follow required air pressure relief procedures for relieving air pressure from the unit. To reduce the risks associated with compression spring release: • Maintain a firm grip on fluid adjustment knob when removing. To reduce the risks associated with environmental contamination: • Spray materials, solvents, other cleaning materials and electronic components must be disposed of per federal, state and local regulations. 3 4 Spray Gun Overview 3M spray guns were designed from the inside out for the effective, efficient, economical application of paints, adhesives, coatings and finishes. These spray guns deliver large spray patterns with very low overspray. The soft, tight, adjustable pattern with complete atomization results in a high finish quality and absolute control. Each light weight spray gun is designed for easy handling, reliability and durability and for minimum maintenance costs. 3M’s Automatic HVLP spray guns deliver superior atomization for a wide range of coatings. The standard spray gun body is made of light weight aluminum. The Zinc HVLP Automatic Spray Gun body is made of composite material. Manufactured for durability and dependability, both versions are easy to maintain for long-lasting performance. 3M equipment is for professional use only. Hazards can occur from equipment misuse. Any misuse of the equipment or accessories, such as over pressurizing, modifying parts, using incompatible chemicals and fluids, or using worn or damaged parts can cause serious bodily injury, fire, explosion or property damage. Please read and follow all Safety Statements and Instructions. Contents Unpacking Remove the components from the box. Inspect for concealed damage and/or missing items. If you discover any damage and/or missing pieces, contact your distributor immediately. 3M™ Series 52 HVLP Automatic Spray Gun All Series 52 HVLP Automatic Spray Guns are non-bleed spray guns with low pressure air inlets and a manual rear fan control. These spray guns are available with an aluminum gun body, 10 cfm air consumption, 1:1 reduction ratio, .” air inlet connection, and a 10 psi maximum inlet air pressure*. These spray guns are most commonly used for stationary or reciprocator mounting applications. * Maximum inlet pressure will yield approximately 10 psi at the air cap. 5 Contents cont. 3M™ Series 55 HVLP Automatic Spray Gun 3M™ Series 55ZZ HVLP Automatic Spray Gun (Zinc) All Series 55 HVLP Automatic Spray Guns are bleeder spray guns with low pressure air inlets and a manual rear fan control. These spray guns are available with an aluminum gun body or a composite gun body with composite wetted components for zinc compatibility. The technical specifications include 10 cfm air consumption, 1:1 reduction ratio, .” air inlet connection, and a 10 psi maximum inlet air pressure*. These guns are most commonly used for stationary or reciprocator mounting applications. 3M™ Series 56 HVLP Automatic Spray Gun 3M™ Series 56ZZ HVLP Automatic Spray Gun (Zinc) All Series 56 HVLP Automatic Spray Guns are bleeder spray guns with dual air inlets for separate control of atomization and fan air pressures. These spray guns are available with an aluminum gun body or a composite gun body with composite wetted components for zinc compatibility. The technical specifications include 10 cfm air consumption, 1:1 reduction ratio, .” air inlet connection, and a 10 psi maximum inlet air pressure*. These guns are most commonly used for robotic and remote control applications. * Maximum inlet pressure will yield approximately 10 psi at the air cap. 3 6 Contents cont. 3M™ Series 57 HVLP Automatic Spray Gun All Series 57 HVLP Automatic Spray Guns are bleeder spray guns with dual air inlets for separate control of atomization and fan air pressures. These spray guns are available with an aluminum gun body. The technical specifications include 10 cfm air consumption, 1:1 reduction ratio, .” air inlet connection, and a 10 psi maximum inlet air pressure*. These guns are most commonly used for robotic and remote control applications. 3M™ Series 57ZZ HVLP Automatic Spray Gun (Zinc) All 57ZZ Series HVLP Automatic Spray Guns are bleeder spray guns with dual air inlets for separate control of atomization and...
Dieses Handbuch ist für folgende Modelle:Farbspritzpistolen - Series 52 (1.82 mb)
Farbspritzpistolen - Series 55 (1.82 mb)
Farbspritzpistolen - Series 55ZZ (1.82 mb)
Farbspritzpistolen - Series 56 (1.82 mb)