Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
See Figure 1. 2. Slide open the battery compartment door and connect the rechargeable battery into the battery compartment. See Figure 2. 3. Put the handset on the base to charge for at least 24 hours before first use. Subsequent charging time should be 6-8 hours a day. INSTALLING YOUR D613HS USER GUIDE © 2009 Clarity, a division of Plantronics, Inc. All rights reserved. Amplifying your life, Clarity, the amplification device, Clarity and the amplification device combined, Clarity, D613HS, D603, D613, D613C, Clarity Power are trademarks or registered trademarks of Plantronics, Inc. Rev. E (9-09) CONTENTS & PARTS CHECKLIST User guide Handset DC adapter 6V 300mA Charger Your package includes all the items as shown here. If there is anything missing, please contact our Customer Care Department immediately. NOTE: PLEASE RETAIN A COPY OF PROOF OF PURCHASE FOR YOUR RECORDS. Battery Performance The battery icon will blink on the menu screen when the battery is low. A fully charged battery will provide an estimated 10 hours of talk time and 100 hours of standby time. To keep your battery pack in the best condition, leave the handset off the base for a few hours at a time. Running the battery pack down at least once will help it last as long as possible. The charge capacity of rechargeable battery pack will reduce with time as it wears out, giving the handset less talk/standby time. Eventually it will need to be replaced. Note: Battery pack and handset may become warm during charging. This is normal. Battery pack Electric Wall Outlet (insert power adapter) Figure 1 Figure 2 Additional handsets To register your additional handset The original handset is pre-registered for use. Up to 5 handsets can be registered to one base station. Additional handsets must be registered to the base before you can use them. 1. Place the unregistered handset on the charger. 2. Press and hold the FIND button for 4 seconds on the base. 3. Release the FIND button once the IN USE light starts to flash. 4. A confirmation tone will sound when registration is successful. Handset X is displayed where X denotes the number of handsets. The phone will then go back to idle. De-register All Handsets 1. Unplug the power from the base. 2. Press and hold the FIND button on the base for 10 seconds. 3. Plug back in the power of the base. 4. Release once the IN USE light starts to flash rapidly. 5. Within 2 seconds, press and release the FIND button on the base again. This will de-register all handsets. The IN USE light on the base will be OFF and NOT REGISTERED will display on each handset menu screen. INtroduction The D613HS is an expandable handset that is compatible with the Clarity D613, D603 and D613C. The D613, D603 and D613C will support up to 5 handsets. Additional information can be found in the D613/D603/ D613C User Guides. speci fications Amplified dB Level: 30dB Dimensions Handset Size: 7” x 2 ” x 1 1/4” (H x W x D) Base Size: 2 1/2” x 3 1/2” x 4” (H x W x D) Weight Handset Weight: 3.14 ounces Charger Weight: 4 ounces Power Requirements DC Adapter: 6V, 300 mA Battery: 2.4V 550mAh Ni-MH troubleshooting Registration Unable to register another handset 1. If there is a total of 5 handsets registered, the maximum has been reached. 2. The display shows NOT REGISTERED. You must de-register a handset in order to register a new one. Privacy of communications may not be ensured when using this phone. Warning: To maintain the compliance with the FCC’s RF exposure guideline, place the base unit at least 20 cm from nearby persons. For body worn operation, this handset has been tested and meets the FCC RF exposure guidelines when used with the Clarity accessories supplied or designated for this product. Use of other accessores may not ensure compliance with FCC RF exposure guidelines. When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the telephone. 3. Do not use this telephone near a bathtub, wash basin, kitchen sink or laundry tub, in a wet basement, near a swimming pool or any where else there is water. 4. Avoid using a telephone (other than a cordless type) during a storm. There may be a remote risk of electrical shock from lightning. 5. Do not use the telephone to report a gas leak in the vicinity of the leak. 6. Unplug this telephone from the wall outlets before cleaning. Do not use liquid cleaners or aerosol cleaners on the telephone. Use a damp cloth for cleaning. 7. Place this telephone on a stable surface. Serious damage and/or injury may result if the telephone falls. 8. Do not cover the slots and openings on this telephone. This telephone should never be placed near or over a radiator or heat register. This telephone should not be placed in a built-in installation unless proper ventilation is provided. 9. Operate this telephone u...