4. To delete an entry, press ‘Del’. Be sure you wish to delete the entry because it will be deleted immediately. 5. If a call is received from someone in the phone book, their phone book name will be displayed. 43 6. To delete all phone book entries press ‘DelAll’ when the phone book entries are displayed. You will be prompted to press 1 or 2 key (1 for YES and 2 for NO). 3.6 Browse System Information System information (IP address, model information, firmware version…etc.) can be displayed usin

Other telephone line cables might not work Binatone Help Line : 0845 345 9677 29 “The Caller Display .. You need to subscribe to the Caller Display feature from feature isn’t your network service provider. You should find contact working” details on your phone bill. .. The caller may have withheld their number by dialling 141. Or they may be calling from a network that does not transmit the caller’s number (e.g. it may be an international call.) “When I try to .. If you’re using a CC2300 multi-h

You can set the answering machine to answer after two to eight rings or TIME SAVER. If TIME SAVER is set, the answering machine will answer after 6 rings if there are no new messages already recorded, or after 2 rings if there is a new message, so if you call in for remote access and it doesn't answer after 2 or 3 rings, you can hang up and save on call charges, n Note: If your network voice messaging service (e.g. BT 1571) is enabled, you will need to set the ring delay on your Symphony 3325 t

2. Press the SCROLL UP or DOWN button to find the record you want to edit. ## TOTAL 3. Press the EDIT /FLASH button to edit the name. cursor is blinking ## TOTAL 4. Press the SHIFT LEFT or RIGHT button to move the cursor to the letter you want to change. To add, use the TELEPHONE KEYPAD buttons. (See page 26 for details.)To erase, press the ~ DEL / SCAN button. 5. Press the SCROLL UP or DOWN button to edit the number. 6. Press the SHIFT LEFT or RIGHT button to move the cursor to the number you w

Press to reconfirm. If you cannot make a call, the fault may be on the exchange line. Contact the Please note that pre-set OGM cannot be deleted. message, At any time if you want to pick up the call, you can press service provider (the BT engineers on 151 for UK only, or your cable company). 8.5.9.2 Activate or Deactivate the Remote Access 8.5.4.1 Playback the OGM / on the handset and the message recording will be If you still cannot identify the cause of the probl

It will stay in registration mode for about one minute, so the following handset sequence must be completed within this time. 2. Press

“The phone Check that the base unit’s mains power adapter is does not ring” plugged in and power is switched on. The base unit needs mains power for normal operation of the phone — not just for charging the batteries. Make sure you’re using the telephone line cable that was supplied with your DECT Phone. Other telephone line cables might not work. Check that the total REN value of all equipment connected to your telephone line is no more than 4 (see page 3). Disconnect one or more telephones and

This guarantee does not cover any faults or defects caused by accidents,misuse, fair wear and tear, neglect, faults on the telephone line, lightning, tampering with the equipment, or any attempt at adjustment or repair other than through approved agents. Please keep your sales (till) receipt this is your guarantee. You should also keep the original packaging material. In the unlikely event that you need to return your phone system to our Repair Centre while it is under guarantee, there may b

Any unanswered calls which have not been viewed are marked with a < * >icon at the centre of the bottom line of the display. 1. Press to access the call list. OR Press

2. Press