If requested, this number must be provided to the telephone company. b) A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug, RJ11C USOC, is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. c) The REN is used to determine t

Pause Feature A four (4) second pause may be inserted into the speed dialing of the telephone numbers. Press the RD/P button at the required point during storage of a number into memory. 16 UG060205_C410_RevA.qxd 6/15/05 8:03 PM Page 17 Operating Your Telephone Lighted Key Pad The key pad will light for fifteen (15) seconds after removing from the base when there is an incoming call. To reactivate the feature while in standby or in use, press any key. Page / Handset Locator To send a page signal

It will be stored in Caller ID log. Blocked Call If the number is blocked or withheld, “BLOCKED NUMBER” is displayed. It will be stored in Caller ID log. Repeated Call If this is a repeated call, it means you have received calls from this same number before and that they have not been reviewed. 2. If you access the Call Waiting call, the Caller ID information will disappear and the Time/Day screen will appear. 3. If you do not access the call waiting call, the Caller ID information is tran

. . . . . . . . . . . . . . . . .3 Getting Started . . . . . . . . . . . . . . . . . . . .5 Features . . . . . . . . . . . . . . . . . . . . . .5 Connecting Your Telephone . . . . . . . . .8 Choosing a Location . . . . . . . . . . . . .8 Installation . . . . . . . . . . . . . . . . . . . .8 Battery Installation . . . . . . . . . . . . . . .9 Handset Battery Charging . . . . . . . .10 Battery Life . . . . . . . . . . . . . . . . . . .10 Operating Your Telephone . . . . . . . . . . .11 Clarity Pow

C4210™UserGuideC4210™UserGuide 2.4 GHz Cordless Telephone with Caller ID Featuring Digital Clarity PowerTM Technology ESPANOLENGLISHFRANCAIS TABLE OF CONTENTS Safety Instructions.......................................................5 Features.........................................................................9 Getting Started ..........................................................11 Choosing a Location...........................................11 Telephone Installation .................

8. Lift the base’s antenna to a vertical position. 9. Set the TONE/PULSE switch located on the back of the base to correct dialing mode. Please check with your local Phone Company if uncertain of the type of service. 10.Place handset in the cradle to begin initial charging. Remember, you must charge the phone for at least 12 hours before you use the phone for the first time. PM050905_W425_RevA.qxd 5/9/05 4:15 PM Page 13 Getting Started HANDSET BATTERY CHARGING The battery in the handset must be

6. Press any numeric key to add extra numbers. Or Press DEL/CH key to move the cursor to the digit 7. Then press other numeric key to replace 7. 7. Press ENTER after finishing the digits. 8. The display shows ABC with the cursor blinking after the character C. 9. Press any numeric key 2 to 9 to add extra characters. Or Press DEL/CH key to move the cursor back to character C. Then press any other numeric key to change this character. 10.Press ENTER to finish. The modified 19 E N G L I S H PM08040

Press and hold to delete all characters/digits. (During a call): Press this button to mute a call; press again to unmute call. (Calls List/Phonebook entry): Press this button to delete the entry. (Answering Machine mode): Press this button or the “0” key to delete the current message playback. phoneBooK button: Press this button to access the phonebook. (Editing Mode): press to move the cursor to the left. note: The phonebook will hold up to 30 name and numbers. (End)/BacK button: Press to end a

-OR- Press