The screen will display 1. SET DATE 2 Press the VOL+ button twice. The screen will display 3 LCD BRIGHT. 3 Press the MUTE button. The screen will display BRIGHT and a series of “1” representing the display contrast. 4 Use VOL+ and VOL- to adjust the display contrast. 5 Press the MUTE button. The screen will display 3 LCD BRIGHT. 6 Wait a few seconds and the screen will go to idle and display the date and time Set the Interface 1 With the phone on hook, press the MUTE button. The screen will disp

2. Press CID/UP until SETUP is displayed. 3. Press MENU. 4. Press CID/UP until AUTO TALK is displayed. 5. Press MENU. 6. Use CID/UP to select between ON and OFF. 7. Press MENU. 13 Dial Mode Use this option to select TONE or PULSE dialing. The default setting is TONE. 1. Press MENU. 2. Press CID/UP until SETUP is displayed. 3. Press MENU. 4. Press CID/UP until DIAL MODE is displayed. 5. Press MENU. 6. Use CID/UP to select between TONE and PULSE. 7. Press MENU. Backlight Time Use this option to ch

page 3 USING To set the time the Celestia will answer a call, to SETTINGS Recording your outgoing message 1 Press and hold until you hear a ‘beep’ 2 Speak clearly into the microphone Your outgoing message (OGM) can seconds long. The display shows the speak. Do not pause for more than 10 seconds. 09:35 13-10 02/05AM MSG 00-32 -5 OGM REC To check your OGM at 3 Press the PLAY/PAUSE/STOP button when any time you have finished speaking The machine will ‘beep’ then play back your OGM. pausestop • Pres

Press ENTER. The display will show BACK LIGHT TIME. Press ENTER. The display will show the back light time. Use or to select between 30 sec, 20 sec, 10 sec or OFF. Press ENTER. The display will show BACK LIGHT TIME. Press or . The display will show OFF HOOK LIGHT. Press ENTER. The display will show the light time. Use or to toggle between FOR SECONDS (The light will remain on for the backlight time) or ALL THE TIME (The light will remain constantly on). Press ENTER. Press MENU. NOTE: Backlightin

Please note the following the batteries, but safety warnings: I still get a ¦ Use only NiMH (Nickel metal hydride) 1.2 V AAA warning that they rechargeable batteries in the handset. The best way to make are low.” sure you get the right batteries is to take the old ones with you when you go to buy new ones. ¦ Dispose of used batteries safely — never burn them, or put them where they could get punctured. PBX use “Last Number When you first make a call, try pressing the CDS button for a Redial and/

Press Menu/OK, and then press ^ or Ў until you see >Auto Talk. Press Menu/OK again. Press ^ or Ў to turn Auto Talk >On (or >Off). Press Menu/OK to confirm. Press DEL/Mute to return to the idle screen. Handset Naming Press Menu/OK, and then press ^ or Ў until you see >Display. Press Menu/OK again. You will see >Handset Name. Press Menu/OK again. Use the dialpad to enter the desired name. Use < and > to move the cursor left and right. Use DEL/Mute to erase letters. When finished, press Menu/OK to

2. Press to scroll through the list of numbers until the desired number is displayed. 3. Press to dial the number. 28 or or or Redial Book Options Redial Book Options allows a number to be added to the the redial book. 1. Press the Redial soft key in standby mode. 2. Press to scroll through the list of numbers until the desired number is displayed. 3. Press the More soft key to choose the desired option. Add to PB allows the number to be added to the phonebook. Delete removes the selected number

Software changes may have occurred after this printing. Bell Atlantic Mobile reserves the right to make changes in technical and product specifications without prior notice. 4 NTENTS 1» Introduction 3 Important information ....................................................8 Getting Started 11 Front View ...................................................................11 LCD Icons ...................................................................13 Using the Battery Pack ..........

Presa again to turn on the speakerphone. In Redial list / Call List / Contacts entry: Press to make a call to the selected entry in the list. Press again to turn on the speakerphone. During ringing: Press to answer a call. Press again to answer with speakerphone. Steady on when the handset is within range of the base. Flashes when the handset is in marginal range of the base. Off when out of range of the base or cannot communicate with the base. Steady on when a call is in progress. Flashes when

2.6.1 English Character Set Key Alphanumeric Editing (For contacts name editing and renaming handset) Number Editing (For phone number editing, date/time editing) Key press 1st 2nd 3rd 4th 5th 6th 7th 8th 9th 10th 1 space - 1 1 2 A B C 2 2 3 D E F 3 3 4 G H I 4 4 5 J K L 5 5 6 M N O 6 6 7 P Q R S 7 7 8 T U V 8 8 9 W X Y Z 9 9 0 0 0, P (Pause) * * ? / \ ( ) * # # ‘ , - . & # to go to CONTACTS, the first option in the menu list. Press or to go to other options in the menu list. Press <