Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
Start again from step 1. If 3 beeps sound and the display shows “save error”, move closer to the base unit and try again. If “Save error” is still displayed, place the handset on the base unit. Start again from step 1. If you are connected via a PBX, a longer flash time may be necessary to use PBX functions (transferring a call, etc.). Consult your PBX installer for the correct setting. If a power failure occurs, the setting will return to the factory preset (700 ms). Reprogram if necessary. For Call Waiting Service Users Press I FLASH/CALL WAIT] or I CALL WAIT I if you hear a call-waiting tone while talking. • The first call is put on hold and you can answer the second call. • To return to the first caller, press I FLASH/CALL WAIT] or I CALL WAITl again. • You can press I FLASHl instead of (CALL WAITl on the handset. • If this function does not operate properly, the flash time (call waiting time) may not be set correctly. Consult your telephone company for details. See pages 52 and 53 for how to adjust the time. 53 NANCY BROWN 1-000-222-3333 ----Waiting---- Visual Call Waiting (Call Waiting ID) Service Visual Call Waiting (Call Waiting ID) Service allows your handset to display the second caller’s information. After you hear a call-waiting tone while talking, the handset will display the caller’s name with the phone number and “----waiting---- • The second caller’s information will not be displayed when: —you are having a conversation with the base unit while the handset is off the base unit, —the answering system is recording someone’s message, or —a parallel connected telephone is in use. ® Please contact your telephone company for details and availability in your area. Automatic Security Code Setting Whenever you place the handset on the base unit, the unit automatically selects one of a million security codes. These codes help prevent the unauthorized use of your telephone line by another cordless telephone user. Temporary Tone Dialing (For Rotary or Pulse Service Users) Press ITONEI before entering access numbers which require tone dialing. • The dialing mode changes to tone. You can enter numbers to access an answering service, electronic banking service, etc. When you hang up, the mode will return to pulse. • Access numbers entered after pressing ITONE] will not be included when redialing. How to Use the PAUSE Button (For Analog PBX Line/Long Distance Service Users) We recommend you press [REDIAL/PAUSEI if a pause is required for dialing with a PBX or to access a long distance service. Ex. Line access number (9) (PBX) • Pressing iREDIALiPAUSEl once creates a 3.5 second pause. This prevents misdialing when you redial or dial a stored number. • Pressing IREDIAUPAUSEI more than once increases the length of the pause between numbers. 54 Automatic Answering Operation When the unit answers a call, a greeting message is played and the caller’s message is recorded. • The total recording time (including greeting message) is about 15 minutes. If messages are recorded in noisy rooms, the time may be shortened by up to 3 minutes. • A maximum of 54 messages (including greeting message) can be recorded. Setting the Unit to Answer Calls Press I ANSWER ONI to turn on the answering system. • The indicator lights and “Answer set” is heard. • The unit will announce the remaining recording time if it is less than 5 minutes. • If you hear “Memory full”, “ECTI” is displayed on the base unit and the ANSWER ON indicator flashes rapidly, erase some or all of the messages (p. 59). • If you do not want the unit to answer calls, press [ANSWER ON] again to turn off the answering system. The indicator light goes out and “Answer off” is heard. • You can also turn on the answering system remotely using any other phone (p. 71). Monitoring incoming calls While a call is being recorded, you can monitor it through the speaker. To answer the call with the speakerphone, press I DIGITAL SP-PHONEl or (REMOTE SPl. For the handset, lift the handset off the base unit or press (TALK). The unit stops recording. 1 ANSWER ON] r and Indicator Listening to Messages You can see the total number of recorded messages on the base unit display. If the ANSWER ON indicator flashes, new messages have been recorded. Listening to only new messages Press I NEW MESSAGE! briefly. • The unit announces the number of new messages and plays them back. Listening to all recorded messages Press and hold (NEW MESSAGE! until playback starts. At the end of the last message, “End of final message" is heard. The unit will announce the remaining recording time if it is less than 5 minutes. During playback, the display shows the message number. To increase the volume, press VOLUME 0. To decrease, press VOLUME Q. Flash Memory Message Backup Messages are stored indefinitely on a “flash memory” 1C chip and will not be affected by power failures. All messages are saved until you erase them. 56 During playback To...