Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
Allow the motor to cool afterwards. 14. To avoid injury by accidentally switching on the appliance when inserting the dough hooks, beaters, chopper and hand blender attachment, always set the switch to position ‘OFF’ and unplug the appliance before assembling or disassembling. 15. Use only on appropriate AC voltage outlets. ( See rating label on bottom of appliance) . IMPORTANT NOTICE This appliance has a polarized plug (one blade is wider than the other) . To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way. SAVE THESE THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY Rev. 02/02B Main Components Model EP545XX 1 3 4 2 1. Stand with Gear Drive 3. Mixer Beaters (2) 2. Plastic Bowl 4. Dough Hooks (2) NOTE: This Stand & Bowl is to be exclusively with your Bravetti model EP545 300W Power 1 INSTRUCTIONS FOR USE When using your Bravetti Power Mixer with the Stand & Bowl, use the beaters and dough hooks with the plastic gear on the shaft otherwise the bowl will not rotate. TO USE BEATERS OR DOUGH HOOKS A. To insert beaters or dough hooks: Make sure that the mixer is unplugged from power source and speed selector is set on ‘OFF’ (0) before inserting or removing beaters or dough hooks. Always insert the attachments with the gear into the larger hole. (See illustration below.) Select the attachment according to the type of mix required. Beaters: For liquid mixes such as creams, egg- whites, cookie doughs, etc. Insert beaters one at a time, by placing stem end of beaters into opening on bottom of mixer. Place beater with gear into the larger hole. (See illustration below. ) Press beater in gently and rotate slightly until beater clicks into place. Gently tug on beaters to ensure they are secured properly. Dough hooks: For light doughs. To insert dough hooks: Insert dough hooks in the same way as beaters above. Always use both dough hooks. Never try to work with one beater and one dough hook at the same time. Do not use dough hooks at low speeds as this may cause motor to overheat. When using dough hooks for heavy or thick dough, use only high speeds (Hi 1-3) from the beginning to prevent the motor from overheating (blocking). IMPORTANT: The beater or dough hook with the gear must be inserted into the larger opening. Larger hole Insert in larger hole Gear 2 HOW TO PLACE THE POWER MIXER ON THE STAND • The stand for the Power Mixer has two tabs on top of the support arm for the mixer. (Fig. 1) • On the bottom of the power mixer there are two slots next to the holes for inserting the beaters or dough hooks. (Fig. 2) • Hold the Power Mixer in your right hand at an angle. Slide it from left to right securing the two tabs on the stand into the two slots of the Power Mixer. ( Fig. 3) • Push the power Mixer down on the stand to engage the lock (Fig. 4) that secures the Power Mixer to the stand. (Fig. 5) NOTE: To lock the Power Mixer onto the stand more easily, push the lock release button as you are lowering the Power Mixer down onto the stand. (Fig. 6) Fig. 1 Fig. 2 Fig. 3 Fig. 5 Lock Fig. 4 Fig. 6 3 HOW TO REMOVE THE POWER MIXER FROM ITS STAND • To remove the Power Mixer from the stand, push the lock release button and lift the Power Mixer upwards. (Fig. 7) • In order to lift the Power Mixer while it is on the stand, push the locking flap and pull the Power Mixer upwards. (Fig. 8 & 9) Fig. 7 Fig. 8 Fig. 9 4 THREE (3) YEAR LIMITED WARRANTY EURO- PRO Operating LLC warrants this product to be free from defects in material and workmanshipfor a period of three (3) years from the date of purchase when utilized for normal household use. If your appliance fails to operate properly while in use under normal household conditions within thewarranty period, return the complete appliance and accessories, freight prepaid to EURO-PRO Operating LLC. Call customer service at 1 (800) 798-7398. If the appliance is found by EURO-PRO Operating LLC to be defective in material or workmanship, EURO- PRO Operating LLC will repair orreplace it free of charge. Proof of purchase date and $5.00 to cover the cost of return shipping andhandling must be included. * The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement ofthe unit at our option. This warranty does not cover normal wear of parts and does not apply to any unitthat has been tampered with or used for commercial purposes. This limited warranty does not coverdamage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit. This warranty is extended to the original purchaser of the unit and excludes all other legal and/orconventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the specific obligations expressly assumed by it under the terms of the limited warranty. In no event is EURO- PRO ...