Stimmen - 3, Durchschnittliche Bewertung: 4.7 ( )

Hersteller: Cisco Systems Dateigröße: 1.64 mb Dateiname: solas_1500_user_guide.pdf Unterrichtssprache:

This may take a short while. The handset will automatically be allocated the next available handset number. This handset number is shown in the handset display in standby mode. If the handset registration is unsuccessful, the will still flash and the display will return to "REGISTER", so you will need to repeat the registration process. 7.6 Reset Your Phone You can reset your phone to the default settings . Alter a reset, all your personal settings, call list entries and redial list entries, will be deleted but your phonebook remains unchanged. 1. Press

and to select DEFAULT. 2. Press <0K> and you are requested to enter the 4-digit system PIN. 3. Enter the 4-digit system PIN. 4. Press <0K> to display CON FIRM? 5. Press <0K> to confirm, and the phone will be reset to its default settings. 8 TROUBLESHOOTING When connect to a PBX, no and/or wrong connection after dialling. "SEARCHING" is displayed. The call does not work. No display. Causes a.The connection cord of the base station is not plugged in. b.The adapter cord is not plugged in correctly in the base station. c. Another handset is using the base to make a call. d. Wrong telephone line cord Dialling prefix is needed. a. Base station out of b. Base station not connected to mains. Service not activated oi wrong setting Empty battery Solutions a.Check the connections. Unplug and plug back in the mains. Check that the telephone cord has been plugged into the base station and the phone socket. b.Check the base station plug and the 230V plug (remove and plug-ir c.Wait until the line is unoccupied. d.Use the original telephone line cord supplied Insert the dialling prefix Reduce the range. Connect base station to Recharge battery This telephone is not equipped with a grounding lunction, and therefore some of the functions may be limited when used in PBX systems. Technical Support If the fault persists... Disconnect all other instruments connected to the same line as the Solas series and try to make a call. Disconnect the base unit from the telephone line and plug a different phone into the master telephone socket. Try makinga call. If this works, the line is OK. If the call does not work,and you are using a two-way socket adapter, remove it and plug a telephone directly into the socket. If the call now works, the adapter may be faulty. 9 DECLARATION OF CONFORMITY We the manufacturer / Importer: Binatone Telecom Plc,1 Apsley Way London, NW2 7HF Declare under our sole responsibility that the following product Type of equipment: Digital cordless telephone Model Name: Solas 1505 Series Country of Origin: China Brand: Binatone complies with the essential protection requirements of R&TTE Directive 1999/5/EC on the approximation of the laws of the Member States relating to Radio Spectrum Matters, the Council Directive 2004/108/EC on the approximation of the laws of the Member Statesrelating to electromagnetic compatibility (EMC) and the European Community Directive 2006/95/EC relating to Electrical Safety. Assessment of compliance of the product with the requirements relating to the essential requirements according to Article 3 R&TTE was based on Annex III of the Directive 1999/5/EC and the following standard: Radio Spectrum: ETSI EN 301406: V2.1.1 (2009-07); EMC: ETSI EN 301489-6: V1.3.1 (2008-08); ETSI EN 301489-1: V1.8.1 (2008-04); Electrical Safety: EN 60950-1: 2006+A11: 2009. MSJJ Manufacturer / Importer (signature of authorized person) 31 May 2010 Date Signature The conformity to the requirements is validated by the C€ symbol. NOTE: In compliance with Directive 2002/9&EC, when you purchase a product that comes with the symbol shown on the right, you are required to dispose of electrical and electronic equipment by separate waste collection and you cannot dispose of the product as normal waste. This equipment and all its components, subsystems and consumable materials formed an integral part of this product and when you decide to dispose ' of them you have to take them to a local recycling centre for appropriate waste disposal, in compliance with the current regulations. Details about the location of these centres can be obtained from _ your local authority. Notes for battery disposal Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please be aware of the local rules on separate collection of batteries. The correct disposal of batteries helps protect the environment and prevent health hazards. 23 24 25 Note: The respective melody will be played while browsing the ringtone list. 5. Press to confirm. 7.3.2 Set the Ringer Melody for External Calls 1. Press and to select HS SETTINGS. 2. Press and to select RING SETUP. 3. Press and to select EXT RING. 4. Press and to select the melody you want to hear for external...

Dieses Handbuch ist für folgende Modelle:
Schnurlostelefone - 1505 (1.64 mb)
Schnurlostelefone - 1505 (1.64 mb)
Schnurlostelefone - 1505 (1.64 mb)
Schnurlostelefone - 1505 (1.64 mb)

Alle anzeigen

Schnurlostelefone - 1505 (1.64 mb)
Schnurlostelefone - 1505 (1.64 mb)

Herunterladen

Geben Sie zwei Ziffern: