Login:
Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Anleitung Binatone, modell 1505

Hersteller: Binatone
Dateigröße: 1.64 mb
Dateiname: solas_1500_user_guide.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


Press and hold to put base into registration i CHARGING CRADLE Display Icons and Symbols The LCD display gives you information on the current status of the telephone. Y-С fjjlOK ► £ Indicates you can scroll up / down the menu items / Phonebook list / Redial list/Call List ’Y' Steady when the handset is in range of the base. Flashes when out of range of the base or not registered to the base. ^ Steady when an intercom call is in progress. Flashes when there is an incoming internal call. f Indicates a call is in progress on that handset. Flashes when there is an incoming external call. Indicates that the handset ringer is switched off. @ Steady when an alarm is set. Flashes when the alarm is sounding, fi Indicates that the keypad is locked. Q-O Indicates when you have a new Voice Mail message. (This is a Caller Display service and is not usually available from UK network providers.) ■¡Щ) Indicates when the battery is fully charged. Whole icon flashes when the battery is charging. Internal block icon flashes when the battery is in final charging stage. 4.3 End a Call During a call press to end the call. OR Put the handset on the base station or charger to end the call. 4.4 Adjust Earpiece Volume There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for the earpiece volume. During a call: Press to select volume 1-5. The current setting is shown. When you end the call, the setting will remain at the last selected level. 4.5 Mute a Call You can talk to someone nearby without letting the caller hear you during a call. During a call: Press to mute the microphone and “MUTED" will display on the LCD. Your caller cannot hear you. Press again to unmute the microphone. 4.6 Turn off the Handset Ringer In idle, press and hold to turn off the handset ringer. The “RINGER OFF” icon is displayed on the LCD. Note: The display will still flash the Call icon and show CALL or the Caller Display number, when there is an incoming call, even if the ringer is turned offL To turn the ringer back on, press and hold again. 4.7 Turn on the Keypad Lock In idle, press and hold to turn on the keypad lock. The LOCK” icon is displayed on the LCD. Note: You can still use to answer a call when the handset is ringing. To turn the keypad lock off, press and hold again. 4.8 Redial the last number You can redial any of the 5 last numbers called. If you have stored a name in the phonebook to go with the number, the name will be displayed instead. The most recent last number will display at the top of the redial list. 4.8.1 Redial a Number from the Redial List 1. Press to access the redial list. Note: If the redial list entry shows a name, press to view the number of this entry. L 2. Press to browse the redial list. 3. Press to dial to the selected redial number. Note: If there are no numbers in the redial list, the display shows “EMPTY”. 4.8.2 Store a Redial Number into the Phonebook 1. Follow Steps 1 and 2 in section 4.8.1. 2. Press

and to select ADD TO PB. 3. Press and then enter the name you want to use in the phonebook. 4. Press and then modify the number, if necessary. 5. Press to show . 6. Press to browse the ringtone list. The respective ringtone will be played when browsing the ringtone list. (Note: the selected melody will only be played if you subscribe to Caller Display and the incoming number matches the stored number.) 7. Press to confirm, and the entry will be stored. 4.8.3 Delete a Redial Number 1. Follow Steps 1 and 2 in section 4.8.1. 2. Press and to select DELETE. 3. Press to confirm, and the entry will be deleted. 4.8.4 Delete all Redial List entries 1. Follow Steps 1 and 2 in section 4.8.1. 2. Press and to select DELETE ALL 3. Press to display . 4. Press to confirm. All entries will be deleted and the display will show . 4.9 Find the Handset You can locate the handset by pressing on the base station. All the handsets registered to the base will produce the paging tone and show "PAGING" on the display. You can stop the paging by pressing / / on any handset or on the base again. Note: If there is an incoming call during paging, the phone will ring with the incoming call instead of paging. 4.10 Make an Internal Call (For multi-handset versions only) This feature is only applicable when there are at least two registered handsets. It allows you to make internal calls, transfer external calls from one handset to another handset and make conference calls. If the called handset is not answered within 60 seconds, the called handset will stop ringing and the calling handset will return to standby mode. Note: If only one handset is registered to the base station, when is pressed, it will di...

Dieses Handbuch ist für folgende Modelle:
Schnurlostelefone - 1505 (1.64 mb)
Schnurlostelefone - 1505 (1.64 mb)
Schnurlostelefone - 1505 (1.64 mb)
Schnurlostelefone - 1505 (1.64 mb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien