If the CD you have selected is still unnamed, eight underlines appear on the display. The current input position flashes. . Use the buttons : to select your characters. If a position is left blank, you have selected the underline. . Use the or button : to proceed to your next input position. . Press the MENU button 8 or OK ; to save the name entered. Clearing a CD name . Listen to the CD whose name you wish to clear. . Press the MENU button 8. . Use the buttons : to select “CD NAME”. . Press the

Oppna Por favor, abrir Favor abrir 7914 2 3 6 101213 8 1 4 11 5 7914 2 3 6 101213 8 1 4 11 5 OPERATING ELEMENTS 1 button for opening the control unit 2 Button for switching the device on and off and for muting the device 3 Volume control 4 Softkeys. The function of the Softkeys depends on the contents of the display at the time 5 OK button for confirming menu entries and for leaving the menu 6 DEQ button for calling up the equalizer menu 7 Multi-function rocker 8 MENU button, which calls up the

disc and tracks names) is displayed continually or just once when a new track begins or a new MD is inserted. Switching scrolling text on/off . Press the MENU button, 8. . Using the / buttons, 7, select current status, either “SCRL ON” or “SCRL OFF”. . Press button or , 7, to switch scrolling on or off. . Press the OK button, 5, or the MENU button, 8, to exit the menu. Your settings have been saved. Traffic announcements during MD operation . If you wish to receive traffic announcements during M

MID/HIGH EQ 1,600 - 6,300 Hz . HIGH EQ 8,000 - 12,500 Hz Switching the equalizer on/off To switch the equalizer on/off, . press the DEQ+ button 5. The equalizer menu is displayed. To activate the equalizer, . Press the softkey 4 assigned to the “USER” or “PRE” display item and select an equalizer. To deactivate the equalizer, . Press the softkey 4 assigned to the “OFF” display item. Automatically calibrating the equalizer You can electronically calibrate and store values for three different situ

. All current settings of the radio are saved. . CD already inserted in the unit remains there. Attaching the control panel There are various ways of attaching the control panel but the following method is recommended: . Hold the control panel perpendicular to the unit. . Slide the control panel into the unit’s guides, located at the lower left and right sides, until it clicks into place. . Push the control panel gently in upward direction until it clicks into its place. 1 2 Note: . When attachi

You can choose between Europe (EUROPE), America (USA), Thailand (THAI) and South America (S-AMERICA). The tuner comes from the factory set for the region in which the unit was sold. Should you encounter problems with radio reception, please check this setting. This set of instructions refers to the “USA” setting. . Press the MENU button 8. . Press the fi button 7 repeatedly until “TUNER” appears on the display. . Keep pressing the @ or # button 7 until the desired region appears in the display.

5 BND button (band), source selection for radio mode, selection of FM memory levels and the wavebands MW and LW (MW and LW are not available on the Dusseldorf C51 and Kansas DJ51 units) TS, starts the Travelstore function. 6 Display (display field) 7 button - indicates the time on the display DIS, change display contents 8 MENU button - selects the menu for basic settings 9 button - opens the flip/release panel : Arrow-key block ; OK button - confirms menu entries and starts the scan function <

46 Important ...................................... 47 Read the following before using the unit .................................................. 47 Traffic safety ......................................... 47 Installation............................................. 47 Telephone mute .................................... 47 Accessories .......................................... 47 Guarantee ............................................. 47 International hotline .............................. 47 K

SWITCHING ON/OFF Switching on/off There are various ways of switching the unit on/off: Switching on/off using the vehicle ignition If the unit is correctly connected to the vehicle's ignition and it was not switched off using button A, it will switch on/off simultaneously with the ignition. You can also switch the unit on even if the ignition is off: . To do so, press button A. Note: . To protect the vehicle battery, the unit will switch off automatically after one hour if the ignition is off. S

. The unit switches off after the control panel is removed. . All the current settings are saved. . Any CD already inserted in the unit remains there. Attaching the control panel . Slide the control panel from left to right into the unit’s panel locking mechanism. . Press the left-hand edge of the control panel into the unit until it clicks into place. Note: . When attaching the control panel, make sure you do not press the display. If the unit was still switched on when you removed the control