Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
SWITCHING ON/OFF Switching on/off There are various ways of switching the unit on/off: Switching on/off using the vehicle ignition If the unit is correctly connected to the vehicle's ignition and it was not switched off using button A, it will switch on/off simultaneously with the ignition. You can also switch the unit on even if the ignition is off: . To do so, press button A. Note: . To protect the vehicle battery, the unit will switch off automatically after one hour if the ignition is off. Switching on/off using the removable control panel . Remove the control panel. The unit switches off. . Attach the control panel again. The unit switches on. The settings (radio, cassette, CD changer or AUX) that were set before the unit was switched off will be reactivated. Switching on/off using button A . To switch the unit on, press button A. . To switch the unit off, press button A for longer than two seconds. The unit switches off. Switching on by inserting a cassette If the unit is switched off and there is no cassette inserted in the drive, . Gently insert the cassette with the open side facing towards the right into the drive until you feel some resistance. The cassette will be drawn automatically into the drive. You must not hinder or assist the drive as it draws in the cassette. The unit switches on. Cassette playback begins. ENGLISH 29 ADJUSTING THE VOLUME Adjusting the volume The system volume can be adjusted in steps from 0 (off) to 66 (maximum). To increase the system volume, . press the button @. To decrease the system volume, . press the button @. Setting the power-on volume You can set the unit's default power-on volume. . Press the MENU button =. . Keep pressing the or button < until “ON VOL” appears in the display. . Set the power-on volume using the and buttons <. To help you adjust the volume more easily, the volume will be increased / decreased as you make your changes. If you change the setting to “0”, the pow- er-on volume will be the same as the volume level that was set before the unit was last switched off. Note: . To protect your hearing, the power- on volume is limited to a value of “38”. If the volume level was higher when the unit was switched off, the volume will be reset to “38” when the unit is switched on again. When you have finished making your changes, . press the MENU button = twice. Instantaneous volume reduction (mute) This feature allows you to instantaneously reduce (mute) the volume to a level preset by you. . Briefly press button A. “MUTE” appears in the display. Setting the mute level You can set the unit’s mute volume level. . Press the MENU button =. . Keep pressing the or button < until “MUTE LVL” appears in the display. . Set the mute level using the and buttons <. When you have finished making your changes, . press the MENU button =. Mute during telephone operation If your car audio system has been equipped with a mobile telephone, it will automatically switch to mute when you use the phone. This will not work unless the mobile phone is connected to the car audio system as described in the installation instructions. If a traffic announcement is received while the phone is in use and traffic information priority has been activated, you will hear the traffic announcement. For more information, refer to the section on “Traffic information reception”. The car audio system will be muted to the mute level selected. ADJUSTING THE VOLUME Configuring the confirmation beep For some functions you will hear a confirmation beep if you keep a button pressed for longer than two seconds. For instance, after storing a radio station to a station button you will hear a confirmation beep.You can configure the beep. . Press the MENU button =. . Keep pressing the or button < until “BEEP OFF” or “BEEP ON” appears in the display. “BEEP OFF” means that the confirmation beep is switched off, “BEEP ON” means that it is switched on. . Make your selection using the or button <. When you have finished making your changes, . press the MENU button =. ENGLISH 31 RADIO MODE Radio mode This unit is equipped with an RDS radio receiver. Many of the receivable FM stations transmit a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). The station name appears in the display as soon as it is received. Switching to radio mode If you are in cassette, CD changer or AUX mode, . press the BAND (TS) button 2 or FMT button 2. “RADIO” appears in the display. RDS functions (AF, REG) The RDS functions AF (Alternative Frequency) and REG (Regional) extend your radio’s range of functions. . AF: If the RDS function is activated, the unit automatically tunes into the best receivable frequency for the station that is currently set. . REG: At certain times, some radio stations divide their programme into regional programmes providing different regional content.You can use the REG function to prevent the car radio from switching to alternative frequen...
Dieses Handbuch ist für folgende Modelle:Radios - Cleveland DJ31 (1.17 mb)
Radios - Dresden C31 (1.17 mb)
Radios - Dublin C31 (1.17 mb)
Radios - Madison DJ31 (1.17 mb)