Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
For cd clock radios with a fitted plug. If the socket outlets in your home are not suitable for the plug supplied with this appliance the plug should be removed and the appropriate one fitted. IMPORTANT : THE PLUG REMOVED FROM THE MAINS LEAD, IF SEVERED, MUST BE DESTROYED AS A PLUG WITH A BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED INTO A LIVE SOCKET OUTLET. Should the fuse in the 13 amp plug require changing a 3 amp BS1362 fuse must be fitted. Battery back-up facility (unit will work without a battery being fitted) Your cd alarm clock radio is equipped with a battery back-up facility. 1 Remove the battery compartment cover (at the rear of the unit) by pushing in the clip and lifting off. 2 Insert a battery size 9 volts PP3/6LR61 (Ensure battery is inserted correctly) 3 Replace the battery compartment cover. Should a power interruption occur the clock will continue to run, however, time keeping will not be accurate. The display will be extinguished to conserve battery life but the memory will retain details of the clock time and alarm settings. If the optional battery is not installed in case of the AC power failure the display will blink to indicate the power was interrupted. You will need to reset the clock and alarm. Battery back-up is designed to operate for a short period only. If the unit is not to be used for a prolonged period, remove the battery to avoid battery leakage. In the interests of environmental safety : dispose of batteries safely. Illustration 28 26 18 19 AL1 15 16 17 Location of controls 1 momentarily stopplayback Play/pause button: to switch unit on and start playback. To 2 Stop button: to stop cd playback 3 Skip/fast search/selection ( backward / forward): -to skip cd tracks and for fast search within a track -for quick and normal setting of alarm clock functions (quick selection: Press and hold / normal selection: press repeatedly) 4 PLAY MODE: to play a cd in mixed (random) mode or select program 5 REPEAT: For continuous cd playback 6 Repeat mode light indicator 7 Play mode light indicator 8 Snooze button: To cancel alarm for 6 minutes 9 Sleep button: to play music automatically, turn off after set period of time 10 Time button: to set time 11 Alarm 2 button: to set alarm 2 12 Alarm 1 button: to set alarm 1 13 Power on/off button: to turn radio and alarm on and off 14 ALT Alarm track button: to select your favourite cd track for waking up to music P.2 Setting the clock time 1 While holding down the TIME button (10), press the 20 21 AL2 FM Stereo 22 23 24 25 15 Function selector switch CD/MW/FM stereo 16 Volume control 17 Headphone jack 3.5mm 18 cd compartment 19 Clock display 20 Alarm 1 + 2 switch 21 Alarm 1 and 2 LED indicators 22 Alarm selector 23 FM stereo LED indicator 24 Tuning control: to select a radio station 25 Scale and pointer 26 Speakers 27 Power cord 28 Battery compartment 29 FM wire antenna 30 ALT LED indicator 31 Power LED indicator or (3) to set the desired time. The PM indicator will light up when 12:00 midday is reached. 2 Release the button to save time setting. Radio operation FM wire aerial To obtain the maximum FM reception fully extend the wire FM aerial (29) (which is located at the rear of the unit) and alter the direction of the wire for best results. The aerial for the MW waveband is located inside the unit. To obtain the maximum MW reception rotate the clock radio. 1 Slide the FUNCTION SELECTOR switch (15) to select MW or FM. 2 Press the POWER on/off button (13). 3 Adjust the VOLUME control (16) to a suitable level. 4 Slowly adjust the TUNING control (24) to select your desired station. The FM LED indicator (23) will light up when an FM stereo signal is received. 5 To switch off the radio, press the POWER on/off button (13). To play compact disc 1 Press the power on/off button. 2 Open the cd door and load a disc in the cd compartment (18). 3 Select the cd mode (15). 4 Press the button (1). The display will show the track number when you begin to play a cd. After a few seconds, the display reverts to the current time. Note : The same button can be used to momentarily interrupt playback. The track number will flash until the button (1) is pressed again. 5 Adjust the volume control (16) until the desired level is reached. 6 Press the button (2) to stop playback. 7 To switch off the cd, press the power on/off button. P.3 P.4 Other cd functions SKIP/FAST REVERSE SEARCH 1 Press once to skip to the next track or many times as required to reach desired track. Press the to return to the beginning of the current track or as many times as required to go back to desired track. Press or and hold for fast search within the current track. REPEAT button 1 Press once for repeat of current track. The repeat indicator will flash. 2 Press again for the whole cd to be repeated, the indicator will light. 3 Press again to cancel the repeat function. Repeat LED indicator will go out. PLAY MODE 1 Press playmode button for random playback of all cd tracks. The playmode LED indicat...