Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
—Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Features • Radio Controlled Clock Auto Adjust System. • Dual alarm FM/AM PLL (phase locked loop) synthesized clock radio. • Triple time display – main display for the clock, and two sub-displays for the alarms. • Green backlight LCD with adjustable brightness. • Date button to display the year, month and day. • Easy preset digital tuning with 15 memory presets. • D.S.T. (Daylight Saving Time) – Summer time adjustment (one-hour skip function). • Various types of alarms-radio, buzzer and 2 melodies. • Extendable snooze – snooze time can be extended from 10 to 60 minutes (maximum). • Nap Timer allows you to take a short nap and wake to buzzer without changing your alarm settings. (You can select your nap time from 10 to 120 minutes) Troubleshooting Should any problem occur with the unit, make the following simple checks to determine whether or not servicing is required. If the problem persists, consult your nearest Sony dealer. Unable to receive time signals • Inappropriate location for setting up antenna. Try moving the antenna to a different location. If reception is still bad, wait for awhile because reception may improve at a later time. See “Improving the Reception.” The clock does not show the correct time. • Has an electrical power outage lasting more than 1 minutes occurred? The radio or buzzer alarm does not sound at the preset alarm time. • Has the desired radio or buzzer alarm been activated? (i.e. Is the display ALARM A or B turned on?) The radio alarm is activated but no sound comes on at the preset alarm time. • Has VOLUME been adjusted ? Precautions • Operate the unit only on 120 V AC, 60 Hz. • To disconnect the power cord (mains lead), pull it out by the plug, not the cord. • Do not leave the unit in a location near a heat source, such as a radiator or airduct, or in a place subject to direct sunlight, excessive dust, mechanical vibration, or shock. • Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on a surface (a rug, blanket, etc.) or near materials (a curtain) that might block the ventilation holes. • Should any solid object or liquid fall into the unit, unplug the unit and have it checked by a qualified personnel before operating it any further. • To clean the casing, use a soft cloth dampened with a mild detergent solution. If you have any questions or problems concerning your unit, please consult your nearest Sony dealer. Specifications Time display 12-hour system Frequency range FM: 87.5–108 MHz AM: 530–1 710 kHz Channel steps FM: 0.1 MHz (fixed) AM: 10 kHz (fixed) Speaker Approx. 6.6 cm (2 5/8 in.) dia., 8 . Power output 200 mW (at 10% harmonic distortion) Power requirements 120 V AC, 60 Hz Dimensions Approx. 173 . 57.2 . 133.5 mm (w/h/d) (6 7/8 . 2 3/8. 5 3/8 in.) incl. projecting parts and controls Mass Approx. 630 g (1 lb. 6.2 oz.) Design and specifications are subject to change without notice. Printed on 100% recycled paper using VOC (Volatile Organic Compound)- free vegetable oil based ink. Lead-free solder is used for soldering. Halogenated flame retardants are not used in printed wiring boards. ........ ........ ........ ........ ........ ........ ............ ............ ............ ............ ............ ............ ............ .................. Setting the Clock and Date When the unit is plugged in, “AM 12:00,” “We,” and “ ” will flash in the display. Note If you cannot see the display clearly, press and hold ENTER/BRIGHTNESS to set the desired brightness (high, middle or low). To Set the Clock and Date Automatically This radio is equipped with a radio-controlled clockauto- adjust system. The clock-auto-adjust receives standard time data (year, month, day, hour, minute, second, and D.S.T.) on a prescribed frequency, and uses that to automatically reset the clock. To receive correct local time, set the zone selector (illustrated below) on the rear of the radio to the time zone you are in (Eastern, Central, Mountain, or Pacific). If the selector is set to the wrong zone, the displayed time will be wrong. There are no zone settings for Alaska and Hawaii. 1 Plug in the unit. The Clock Auto Adjust function activates automatically. “ ” will flash in the display. It takes about three minutes from the moment that reception starts until the displayed time is correct even if the reception is good. Radio-controlled clock antenna AC power cord FM wire antenna VOLUME .......... .......... .......... .......... .......... .......... .......... .......... ................ ................ ................ ................ ................ ................ ................ ................ ................ ...................... Zone selector 2 When clock adjustment is completed, the clock will start to operate. “...
Dieses Handbuch ist für folgende Modelle:Radios - ICF-C275RC (661.83 kb)