Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
(While the snooze function is active, the selected alarm setting and “Snooze” flash in the display.) To stop the alarm Press RADIO ON/OFF• ALARM RESET to turn off the alarm. The alarm will come on again at the same time the next day. Setting the Sleep Timer You can enjoy falling asleep to the radio using the built-in sleep timer that turns off the radio automatically after a preset duration. 1 Press SLEEP while the unit is turned on. “Sleep” appears in the display. 2 Press SLEEP to set the sleep timer duration. Each time you press SLEEP, the duration changes as follows: The unit automatically turns off when the duration time is passed. Press ENTER or 7 seconds after you have finished setting the duration setting and released SLEEP, “Sleep activated” appears in the display and then the sleep timer starts. The unit will play for the duration you set, and then shut off. To change the Sleep Timer setting Repeat step 2 to select the desired sleep timer setting even after the sleep timer has been activated. To deactivate the Sleep Timer • Press SNOOZE/SLEEP OFF, the unit will turn off. • Press SLEEP to set the sleep timer “Off,” only the sleep timer will be cancelled (the radio keeps on). Continued on the reverse side 2 Press PRESET. 3 Press UP(.)/DOWN(.)•TUNE/SELECT to select the favourite number to preset, then press and hold PRESET. “Preset saved” appears for 7 seconds in the display and the service or station is stored. (DAB services are stored with a service label.) Notes • To preset another service or station, repeat these steps. • To change the preset service or station, tune in to the desired service or station and repeat steps 2 and 3. The new service or station will replace the previous service or station. • When the service or station is not registered, “Empty preset” appears in the display. • If you do not operate within 7 seconds during the above steps, the current mode will be cancelled. Tuning in to a preset service or station 1 Press PRESET. 2 Press UP(.)/DOWN(.)•TUNE/SELECT to select the desired preset station and then press ENTER. Notes • When the service or station is not registered, “Empty preset” appears in the display. • If you do not operate within 7 seconds during the above steps, the current mode will be cancelled. Other useful functions for DAB Other useful functions for DAB To change the display mode, press DISPLAY•BRIGHTNESS during DAB reception. The selected display mode remains even if you turn the unit off and on again, or change the band. The display can be up to 16 characters long. Each time you press DISPLAY•BRIGHTNESS, the bottom in a display changes as follows: Dynamic PTY Ensemble Date Frequency BIT rate and mono/stereo Signal strength Depending on the broadcasting station, the characters in dynamic labels may not be displayed properly. Station order This function enables you to choose how the stations are arranged when selecting a station. There are 3 modes available Alphanumeric, Active stations and Trim stations. • Alphanumeric(default): To select a stored service in alphabetical order. • Active stations: When this setting is switched on, receivable stations are displayed, followed by those not currently being received. • Trim stations: When this setting is switched on the unit will delete the stations that are not currently being received. 1 Follow steps 1 and 2 in “Operating the radio” and select DAB. 2 Press MENU and UP(.)/DOWN(.)•TUNE/SELECT to select “Station order,” and then press ENTER. 3 Press UP(.)/DOWN(.)•TUNE/SELECT to select the desired mode, and then press ENTER. Manual tune This function allows you to tune and add the various DAB Band-III channels to your station list. This function can be used to assist the positioning of the antenna or the unit to obtain the optimum reception for a specific channel / frequency. 1 Follow steps 1 and 2 in “Operating the radio” and select DAB. 2 Press MENU and UP(.)/DOWN(.)•TUNE/SELECT to select “Manual tune,” and then press ENTER. 3 Press UP(.)/DOWN(.)•TUNE/SELECT to select the desired DAB channel, and then press ENTER. The signal strength bars will go up and down showing the changing signal strength as you adjust the reception. 4 Press ENTER. A new DAB channel is added to the station list. DRC Value (DYNAMIC RANGE CONTROL) DRC can make quieter sounds easier to hear when the unit is used in a noisy environment. When DAB broadcasts in dynamic range compression, you can adjust the dynamic range by this unit. 1 Follow steps 1 and 2 in “Operating the radio” and select DAB. 2 Press MENU and UP(.)/DOWN(.)•TUNE/SELECT to select “DRC value” and then press ENTER. 3 Press UP(.)/DOWN(.)•TUNE/SELECT to select the DRC level. The DRC level changes as follows: 4 Press ENTER. Notes • DRC is effective only in dynamic range compression broadcast. • When you adjusted the DRC level, volume can be heard more loudly. Autoscan full These function allows you to automatically scan and create a list of receivable DAB broadcasts. 1 Follow steps 1 and 2 ...