Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Fotos und technische Daten Panasonic RC-DC1 |
Anleitung Zusammenfassung
2 Open the cover of the battery holder. 3 Insert a new battery with the (+) side facing up. 4 Close the cover of the battery holder and secure it with the screw. Replacing the battery The service life of this battery is approximately 1 month. When the battery is weak, the battery-weak indicator will blink constantly on the display. 11 1111 (Continued on next page) 11 ENGLISH ENGLISHENGLISHENGLISH RQTX1207 Note: • Insert with poles aligned. • Do not touch the terminals (+ and –) with metal objects. • Do not recharge, disassemble, remodel, heat or throw into fi re. • Keep out of reach of children. • Do not heat or expose to flame. • Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. • Remove the battery if the clock radio is not going to be used for a long period of time. Store in a cool, dark place. If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water. If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly with water, and then consult a doctor. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Warning Keep the Button-Type battery out of reach of children to prevent swallowing. Warning Risk of fire, explosion and burns. Do not disassemble, heat above 60°C (140°F) or incinerate. For USA-California only This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply. 12 See 12 Troubleshooting guide Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated do not solve the problem, consult your dealer for instructions. ¦ Clock Clock cannot be synchronized to iPod or iPhone’s time. • Make sure the iPod or iPhone is securely connected and turned on (Z page 8). • Update your iPod or iPhone with the latest software. Daylight saving time does not work. • Make sure the clock has been set correctly. • Press and hold [SLEEP] in clock mode to activate daylight saving time (Z page 7). ¦ Alarm The iPod, radio or buzzer alarm does not sound at the preset time. • Check that “ALARM 1” or “ALARM 2” has been correctly activated (Z page 10). The iPod or radio alarm is activated but there is no sound at the preset time. • Check the alarm’s volume setting (Z page 10). ¦ iPod or iPhone The iPod or iPhone cannot be operated with this unit. • Make sure the iPod or iPhone has been securely connected and turned on (Z page 8). • Update your iPod or iPhone with the latest software. There is no sound from the iPod or iPhone. • Make sure the iPod or iPhone has been securely connected (Z page 8). • Adjust the volume. The iPod or iPhone does not charge. • Check the connections. Turn off and remove the iPod or iPhone from the dock connector. Reinsert and turn it on again (Z page 8). ¦ Radio A noise or sound distortion is heard. • Distance the unit away from any television, personal computer or device easily influenced by magnetism. A low hum is heard during AM broadcast. • Separate the antenna from other cables and cords. Reset This function enables you to restore the main unit to the original factory settings or when it is behaving abnormally. Rear view Press [RESET] with a paper clip or a pointed object. Maintenance To clean this unit, wipe with a soft, dry cloth. • Never use alcohol, paint thinner or benzine to clean this unit. • Before using chemically treated cloth, read the instructions that came with the cloth carefully. RQTX1207 ENGLISH ENGLISHENGLISH 13 1313 13 ENGLISH ENGLISHENGLISHENGLISH RQTX1207 Specifications AMPLIFIER SECTION RMS Output Power (Mono) Front channel 2.6 W per channel (8 ), 1 kHz, 10% THD TUNER SECTION Preset memory FM 5 stations AM 5 stations Frequency modulation (FM) Frequency range 87.9 MHz to 107.9 MHz (200 kHz step) 87.5 MHz to 108.0 MHz (100 kHz step) Antenna terminals 75 (unbalanced) Amplitude modulation (AM) Frequency range 520 kHz to 1710 kHz (10 kHz step) 522 kHz to 1629 kHz (9 kHz step) SPEAKER SECTION Type 1 way, 1 speaker system (Bass reflex) Speaker unit(s) Impedance 8 Full range 2.5 cm (1") cone type GENERAL Power supply (AC adaptor) AC 100 to 240 V, 50/60 Hz DC Output 7.5 V Power consumption (with iPod or iPhone charging) Main unit 7 W Dimensions (W x H x D) 112 mm x 80 mm x 150 mm (4 13/32" x 3 9/64" x 5 29/32") Mass (Weight) Main unit 0.37 kg (0.816 lbs) AC adaptor 0.14 kg (0.309 lbs) Operating temperature range 0°C to +35°C (+32°F to +95°F) Operating humidity range 20% to 80% RH (no condensation) Power consumption in standby mode: Main unit 0.3 W (approximate) AC adaptor 0.3 W (approximate) Note: 1) Specifications are subject to change without notice. Mass and dimensions are approximat...