Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Electrostatic discharge In case of error message or malfunction, unplug power supply and remove all batteries; afterwards, connect power supply again. CONTROLS 1. FM AERIAL 11. AM/FM/USB SELECTOR 2. ALARM SET/OFF 12. VOLUME CONTROL 3. TIME SET 13. FUNCTION SELECTOR (ON/OFF/AUTO/BEEP) 4. SLEEP SET 14. PLAY/PAUSE 5. HOUR SET 15. SKIP UP 6. MINUTE SET 16. SKIP DOWN 7. SNOOZE 8. CLOCK LED DISPLAY 9. TUNING CONTROL 10. USB PORT 7. POWER SUPPLY This unit is designed to operate on an alternating current (AC) 230V-50Hz mains supply. The 9V battery is used for clock back-up only in case of power failure. RADIO OPERATION 1. To turn the radio on, slide “FUNCTION SELECTOR” (13) in “ON” position. 2. Slide Band Selector (11) in “FM” or “AM” position. 3. Adjust Volume Control (12) to desired volume level. 4. Turn “TUNING CONTROL” (9) to the frequency of the desired station. 5. To turn the radio off, slide Function Selector (13) in “OFF” position. SETTING THE CLOCK 1. To set the hours hold down “TIME SET” (3) and press “HOUR SET” (5) simultaneously until the desired hour is displayed. Release both buttons. 2. To set the minutes hold down “TIME SET” (3) and press “MINUTES SET” (6) simultaneously until the correct time is displayed. Release both buttons. WAKE UP TO RADIO OR BUZZER 1. Select desired radio station and volume level. 2. Hold down “ALARM SET/OFF” (2) and press “HOUR SET” (5) simultaneously to set the desired alarm hour. Hold down “ALARM SET/OFF” (2) and press “MINUTE SET” (6) simultaneously for the desired setting. 3. Slide “FUNCTION SELECTOR” (13) in “AUTO” position. The radio will turn on to wake you up at the preset time. 4. To wake to buzzer instead of radio, slide “FUNCTION SELECTOR” (13) in “BEEP” position; the buzzer will turn on to wake you up at the preset time. 5. To turn radio or buzzer off, slide Function Selector (13) in “OFF” position or press “ALARM SET/OFF” (2). SNOOZE BUTTON 1. When the buzzer sounds or the radio turns on, pressing the “SNOOZE” button (7) will turn off buzzer or radio temporarily. Approximately 9 minutes later buzzer or radio will turn on again. This operation cycle can be repeated up to five times within an hour, afterwards the wake-up function will automatically be cancelled. 2. To cancel the snooze operation, slide “FUNCTION SELECTOR” (13) in “OFF” position or press “ALARM SET/OFF”(2). 8. SLEEP TIMER 1. Select your favourite radio station. 2. Slide “FUNCTION SELECTOR” (13) in “AUTO” or “OFF” position. 3. Press “SLEEP SET” (4), the clock will display 59 minutes as the default sleep timer period. The setting may be decreased by pressing “MINUTE SET” (6) while holding down “SLEEP SET” (4) simultaneously. 4. The sleep timer may also be set up to 1 hour 59 minutes by pressing “HOUR SET” (5) once while holding down “SLEEP SET” (4) simultaneously. 5. The radio will play for the set period and turn itself automatically off. 6. To turn off the radio prior to the end of sleep timer setting simply press “SNOOZE” (7) once. FALL ASLEEP AND WAKE UP WITH RADIO 1. Select your favourite radio station. 2. Slide “FUNCTION SELECTOR” (13) in “AUTO” position. 3. Set wake-up time as described above. 4. Press “SNOOZE” (7) to set the sleep timer. USB PLAYBACK 1. Connect your MP3 player or memory stick via USB cable or directly to “USB PORT” (10) on the front panel. 2. Set “FUNCTION SELECTOR” (13) to “USB” position. 3. Press “PLAY/PAUSE” (14) for playback function. 4. Press “SKIP UP” (15) or “SKIP DOWN” (16) to select your favourite track for playback. AERIAL The radio has a built-in directional AM aerial. Therefore, changing the orientation of the radio may improve the reception. The radio also has a flexible wire aerial for FM reception at the back, and it should be extended to its full length for best reception. TECHNICAL SPECIFICATIONS Power supply: AC 230V ~ 50Hz Battery back-up: 9V DC, 6F22/E-Block Radio: FM 87.5MHz – 108MHz AM 525KHz – 1615KHz Net Weight: 1.8kg We reserve the right to modify product design and/or specifications without prior notice 9. CARE AND MAINTENANCE Do not subject electronic appliances to extreme temperatures or moisture, do not use in bathrooms or near stoves, ovens or heaters. This radio is manufactured according to the highest safety an quality standards. Nevertheless, take care when handling electric devices. Clean only after disconnecting from mains power supply, use a slightly damp cloth. Do not use polishing or other chemical agents to avoid damaging the surfaces. READ INSTRUCTIONS Read all safety and operating instructions before operating the radio and keep them for future reference. POWER CORD AND LOCATION Place the radio on a level surface and keep sufficient distance for ventilation. Please ensure that ventilation slots are not blocked. Do not place any objects on top of the radio. Cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience recept...