The HHCH and its interface can be stored and mounted out of sight inside a vehicle center console, a glove compartment or under the seat. The long 7-foot coil-cord provides the operator with the length to extend the HHCH out of its stowage. The HHCH provides a practical solution for covert operations, small command posts, limited-space applications and VIP vehicle installations. GENERAL FEATURES • Full Featured Control Head • Compact Handheld Design • TK-5710/5810 Series Compatible • 14-Cha

Now we want to expand the world of sound in ways that only Kenwood can, listening to our customers and to the pulse of the coming age as we head toward a future of shared discovery, inspiration and enjoyment KENWOOD Kenwood U.S.A. Corporation Communications Sector Headquarters 3970 Johns Creek Court, Suite 100, Suwanee, GA 30024-1265 Order Administration/Distribution P.O. BOX 22745, 2201 East Dominguez St., Long Beach, CA 90801-5745 Kenwood Electronics Canada Inc. Canadian Headquarters and

Now we want to expand the world of sound in ways that only Kenwood can, listening to our customers and to the pulse of the coming age as we head toward a future of shared discovery, inspiration and enjoyment KENWOOD Kenwood U.S.A. Corporation Communications Sector Headquarters 3970 Johns Creek Court, Suite 100, Suwanee, GA 30024-1265 Order Administration/Distribution P.O. BOX 22745, 2201 East Dominguez St., Long Beach, CA 90801-5745 Kenwood Electronics Canada Inc. Canadian Headquarters and

Mode Max.32 per Radio Wide 80 dB 80 dB Trunked Network 1023 Narrow 70 dB 67 dB Channel Spacing Wide 25 kHz, 30 kHz 25 kHz Narrow 12.5 kHz, 15 kHz 12.5 kHz Operating Voltage 13.6 V DC±15 % Current Drain Standby 0.4 A 0.4 A 0.4 A 0.4 A Receive 1.0 A 1.0 A 1.0 A 1.0 A Transmit 9.0 A 13.0 A 9.0 A 13.0 A Duty Cycle Transmit: 20 % Operating Temperature Range -22 .F ~ +140 .F (-30 .C ~ +60 .C) Frequency Stability ±0.00025 % (-22 .F ~ +140 .F) Antenna Impedance 50 . Channel Frequency Spread Type 1 38 MH

Speaker, PA, Ignition Connector2 • Ignition Sense3 • Public Address/Horn Alert Output4 • MIL-Spec / Noise-Cancel Mic Opt. • MIL-Spec / Noise Cancel DTMF Mic Opt. • Windows® Programming & Tuning • Windows® Firmware Uploading • Front Panel Test / Tune • Cloning • MIL-STD-810 C/D/E/F CONVENTIONAL ZONES • 128 Channels / 128 Zones • QT / DQT • Two-Tone Decode • Single / Two-Tone Encode • Operator Selectable Tone • Dual Priority Scan • Single & Multi-Zone Scan • List Scan TRUNKED ZONES • 250 GID / 32

3% distortion) Duty Cycle Transmit: 20% 13W (@ 4 . 5% distortion) Internal: 3.2W (@ 16 . 3% distortion) Operating Temperature Range -22.F ~ +140.F (-30.C ~ +60.C) 3.5W (@ 16 . 5% distortion) Frequency Stability ±0.00025% (-22.F ~ +140.F) TRANSMITTER (Measurements made per EIA/TIA-603) Antenna Impedance 50 . RF Output Power 50 to 15 watts 45 to 15 watts High: 50 watts 45 watts Dimensions (W x H x D) 7-1/12” x 2” x 7” Low: 15 watts 15 watts (180mm x 50mm x 170mm) Type of Emission Weight (net) 5.9

The KSGCP401 supports up to four conventional P25 channels and operates dual mode delivering full-featured P25 digital communications and continued service to analog fleets. TKR-7400P/8400P VHF/UHF P25 Conventional Repeater Systems KSGCP401 P25 CONTROLLER • Controls Up to Four TKR-740/840 Units1 • P25 FDMA Common Air Interface • Dual Mode Analog & P25 Conventional • P25 Individual, Group & System Calls • P25 Emergency Calls • Single-Site Conventional • Site Management Ethernet Port •

Remote Control Cable Dimensions (W x H x D) (w/ KCH-10) 7x2-1/4x14 1/8in. 7x2-1/4x14 1/8in. 7x2-1/4x9 in. 7x2-1/4x14 1/8in. 7x2-1/4x9 in. (178x60x360 mm) (178x60x360 mm) (178x60x228 mm) (178x60x360 mm) (178x60x228 mm) 8ft./17ft./25ft. Weight (net) 7.9 lbs. (3.6kg) 7.9 lbs. (3.6kg) 5 lbs. (2.3kg) 7.9 lbs. (3.6kg) 5 lbs. (2.3kg) ¦ KCT-23 FCC ID DC Power Cable Type 1 ALH22923110 ALH22933210 ALH22933110 ALH22943210 ALH22943110 Type 2 ALH22923120 ALH22933120 ALH22943120 Type 3 ALH22923130 ALH22943130

For this reason specifications may be changed without notice. All accessories and options may not be available in all markets. FleetSync® is a registered trademark of Kenwood Corporation. Contact an authorized Kenwood dealer for details and complete LTR® is a registered trademark of Transcrypt International. list of all accessories and options. All other trademarks are property of their respective owners. Applicable MIL-STD footnotes from Front: Standard MIL 810C MIL 810D MIL 810E MIL 810F 1 Two