Stimmen - 4, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
You can send any location that you have available in your Find ‘N If you have not heard from a contact in a while and would like to Quick Start Guide storing it in the unit’s memory. The unit must be turned on and Using optional detailed maps, you can also navigate to points of Go menu. These may be waypoints, contacts, cities, exits, or any know that contact’s current location, you may “poll” the contact’s tracking satellites to mark a waypoint. To mark a waypoint: 1. Press the Thumb Stick In and hold it until the Shortcuts Menu is displayed. 2. Highlight Mark Waypoint and press the Thumb Stick In to display the Mark Waypoint Page shown below. Symbol Field Name Field Mark Waypoint Page 3. Highlight the Name field and press the Thumb Stick In. Enter a new name. When finished, highlight OK then press the Thumb Stick In. 4. Highlight the Symbol field and press the Thumb Stick In. Choose a symbol then press the Thumb Stick In to accept the selection. 5. Highlight the OK button at the bottom of the page and press the Thumb Stick In to save the waypoint. Creating a Breadcrumb Trail As you move, notice that a breadcrumb trail of your path is left on the map. This trail is called a Track Log. You can use the track log to retrace your steps back to a certain location. To view your breadcrumb trail (track log): 1. Use the Page button to display the Map Page. 2. Walk away from your original location for at least three minutes. 3. The default zoom level is 80 miles. Press the Zoom button to zoom in to view the breadcrumb trail (track log) in detail. interest, addresses, and intersections. To begin navigation using Find ‘N Go: 1. Press the Thumb Stick In to display the Shortcuts Menu. 2. Highlight Find ‘N Go and press the Thumb Stick In. 3. Highlight Waypoints and press the Thumb Stick In. Select the desired option (by Nearest or by Name), and press the Thumb Stick In. 4. Highlight the desired waypoint and press the Thumb Stick In. 5. With the Waypoint Page displayed, highlight the Goto button at the bottom of the page and press the Thumb Stick In to begin navigation. The Navigation Page automatically opens to guide you to your destination. See below for more information. Navigation Page The two main components of the Navigation Page are the compass ring and the pointer. As you move, the compass ring rotates showing your current direction of travel at the top of the display. The pointer points toward your destination. When the pointer is aligned with the vertical line at the top of the compass ring, you are on a direct course toward your destination. The unit has to be moving to navigate. If you are standing still or moving very slowly, Navigation Page the navigation data may not be accurate. Using Contacts The first time you receive a signal from another Rino user, the New Contact page is displayed. From the New Contact page you can show the user’s location on your Map, Goto that position, select OK to add them to your contact list, or press the Page/Quit button to disregard the contact. Every time you receive signals from contacts, your map is updated showing their new position. A Track Log of their movement is created and New Contact Page shown on your map. other data that is loaded in the unit. Below are the steps to send a waypoint. To send a location (waypoint) using Find ‘N Go: 1. Press the Thumb Stick In and hold it until the Shortcuts Menu is displayed, or press the Page button until the Main Menu is displayed. 2. Highlight Find ‘N Go and press the Thumb Stick In. Highlight Waypoints and press the Thumb Stick In. Select Nearest or By Name and press the Thumb Stick In. 3. Highlight the waypoint that you want to send and press the Thumb Stick In to display the Waypoint Review page. 4. Highlight the Option Menu button and press the Thumb Stick In. 5. Select Send Location and press the Thumb Stick In. Send Location The location is sent to all Rinos on the same channel and squelch code as you. They can then choose to Goto that location, view the location on the map (Map), or save the location (OK). Using Peer-to-Peer Positioning The Rino’s most unique feature is Peer-to-Peer positioning, sending the location of one Rino unit to other Rino units. Peer-to-Peer positioning allows you to track the movement of other Rino users and even navigate to their location. To send your location: Press and release either the Call or Talk button. Your Rino 120 automatically sends out its location. Other Rino users monitoring the same channel and squelch code receive this information. location. This will update that contact’s location in your Rino 120. To poll a location: 1. Press the Thumb Stick In and hold it until the Shortcuts Menu is displayed, or press the Page button until the Main Menu is displayed. 2. Highlight Find ‘N Go and press the Thumb Stick In. Highlight Contacts and press the Thumb Stick In. 3. Highlight the contact that you want to poll and press the Thumb Stick In to display the Contact Review page. 4. Highlight t...