Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 6.72 mb Dateiname: Unterrichtssprache:

Press the cord rewind button to rewind the mains cord (Fig. 26). Put the appliance in upright position.To attach the nozzle to the appliance, insert the ridge on the nozzle into the storage slot (Fig. 27). Always put the Tri-Active nozzle in the carpet setting when you store it. Also prevent the side brushes from becoming bent (Fig. 10). replacing/emptying the dustbag Always unplug the appliance before you replace the disposable dustbag or empty the reusable dustbag. replacing the disposable dustbag -Replace the dustbag as soon as the dustbag-full indicator has changed colour permanently, i.e. even when the nozzle is not placed on the floor (Fig. 28). 10 English 1 Pull the cover upwards to open it (Fig. 29). 2 Lift the dustbag holder out of the appliance (Fig. 30). Make sure you hold the dustbag upright when you lift it out of the appliance. 3 ,4 5 Pull at the cardboard tag to remove the full dustbag from the holder (Fig. 31). When you do this, the dustbag is sealed automatically. Slide the cardboard front of the new dustbag into the two grooves of the dustbag holder asfar as possible. (Fig. 32) Put the dustbag holder back into the vacuum cleaner (Fig. 33). Note: If no dustbag has been inserted, you cannot close the cover. emptying the reusable dustbag (some countries only) In some countries, this vacuum cleaner also comes with a reusable dustbag that can be used and emptied repeatedly.You can use the reusable dustbag instead of disposable dustbags. To remove and inser t the reusable dustbag, simply follow the instructions in ‘Replacing the disposable dustbag’. To empty the reusable dustbag: Slide the clip off the dustbag sideways. Shake out the contents into a dustbin. To close the dustbag, slide the clip back onto the bottom edge of the dustbag. 1 2 3 Cleaning and maintenance of filters Always unplug the appliance before you clean or replace the filters. Permanent motor protection filter Remove the dustbag holder with the dustbag (Fig. 30). Take the motor protection filter holder out of the appliance.Take the filter out of the holder. (Fig. 34) Shake the filter over a dustbin to clean it. Put the clean filter back into the filter holder. Fit the two lugs of the filter holder behind theridge at the bottom to ensure that it fits properly at the top.Then press the filter holderhome (‘click’) (Fig. 35). Place the dustbag holder with the dustbag back into the appliance. super Clean air filter (specific types only) Clean the permanent motor protection filter ever y time you replace the dustbag. 1 2 3 4 5 The Super Clean Air Filter located in the back of the appliance has electrostatically charged fibres. These fibres filter a large par t of the smaller par ticles from the exhaust air. Replace the Super Clean Air filter ever y six months.This filter is not washable. Open the filter grille (Fig. 36). Remove the old filter (Fig. 37). Insert the new filter into the appliance. Close the filter grille (‘click’) (Fig. 38). 1 2 3 4 English 11 super Clean air HePa 12 filter/ultra Clean air HePa 13 filter This appliance is equipped with either the Super Clean Air HEPA 12 filter or the Ultra Clean Air HEPA 13 filter.These filters are located in the back of the appliance.They are able to remove 99.5% and 99.95% respectively of all par ticles down to 0.0003mm in size from the outlet air.This not only includes normal house dust, but also harmful microscopic vermin such as dust mites and their excrements, which are well-known causes of respirator y allergies. Note:To guarantee optimal dust retention and performance of the vacuum cleaner, always replace the HEPA filter with an original Philips filter of the correct type (see chapter ‘Ordering accessories’). super Clean air HePa 12 filter Replace the Super Clean Air HEPA 12 filter ever y six months.This filter is not washable. 1 2 3 4 Open the filter grille (Fig. 36). Remove the old filter (Fig. 37). Insert the new filter into the appliance. Close the filter grille and push the bottom corners until they snap home (Fig. 38). Washable ultra Clean air HePa 13 filter Clean the washable Ultra Clean Air HEPA 13 filter ever y 6 months.You can clean the washable Ultra Clean Air HEPA 13 filter max. 4 times. Replace the filter after it has been cleaned 4 times. 1 Open the filter grille (Fig. 36). 2 Take out the washable HEPA 13 filter (Fig. 37). 3 Rinse the pleated side of the HEPA 13 filter under a hot slow-running tap. -Hold the filter in such a way that the pleated side points upwards and the water flows parallel to the pleats. Hold the filter at an angle so that the water washes away the dir t inside the pleats (Fig. 39). -Turn the filter 180° and let the water flow along the pleats in opposite direction (Fig. 40). -Continue this process until the filter is clean. Never clean the washable filter with a brush (Fig. 41). Note: Cleaning does not restore the original colour of the filter, but does restore its filtration power. 4 Carefully shake the water from the surface of the filter. L...

Herunterladen

Geben Sie zwei Ziffern: